A shower door seal strip is a flexible vinyl or silicone strip that pushes onto the glass edge, and you replace it by pulling the old strip off, matching the profile and pressing the new one on. The biggest thing that goes wrong is buying the wrong profile, so take the old strip with you or photograph the glass edge.
This guide covers the types of seal, how to measure, step-by-step replacement, pivot hinge replacement, common mistakes and costs. If the door itself is stiff or sticking, our squeaky door guide helps with hinge adjustment.
Key points
- Most seal replacements take about 6 steps and need only a tape measure, a sharp knife and a clean cloth.
- Match the profile to the glass thickness and the gap you are sealing, because a strip that does not suit will still leak.
- Never force a heavy glass door alone; use a second person and call a glazier if the glass is cracked.
- A Sydney handyman typically charges $205 for caulking or weatherproofing jobs (range $115–$345) and $185 for a door repair or adjustment (range $115–$320).
Shower door seal strip: which type do you need?
Seal strips differ by where they sit on the screen, and the wrong type is the usual reason a repair fails.
| Seal position | What it does | Tip |
|---|---|---|
| Bottom wipe or drip seal | Stops water running under the door | Check whether the blade is fin-shaped or flat before buying |
| Vertical side seal | Seals between door and fixed panel or wall | Choose a magnetic or soft-fin profile to match what was fitted |
| Hinge-side seal | Closes the gap along the pivot edge | Often a clear flexible strip that fits to the glass edge |
| Top or header seal | Seals framed screens under the rail | Replace together with the side seals so they wear evenly |
| Frameless glass edge strip | Cushions glass-to-glass contact | Needs the correct clip-on profile for the glass thickness |
- Pull a small sample of the old strip and keep it with you, since hardware shops and bathroom suppliers can match profiles quickly.
- If the existing strip has hardened, torn or gone black with mould, replace it rather than cleaning it.
Shower screen door seal: how to measure and buy
Measure twice and note details before you order, as most online sellers will not accept returns on cut lengths.
- Measure the length of the door edge or gap in metres, and add a little extra so you can trim to fit.
- Check the glass thickness by looking at the edge or at the existing seal’s mouth, because strips are cut to suit specific glass.
- Photograph the old strip from the end to show the profile shape, then bring both the photo and a cut sample to the store.
- Decide on clear, white or black, and whether you need a magnetic or a non-magnetic version.
- Buy from a bathroom supplier or Bunnings for common profiles; ask the maker for the exact part number for a branded screen.
- Buy a small tube of neutral-cure silicone from a brand such as Selleys, Sika or Bostik for any frame gaps.
Shower glass door seal: how to replace it step by step
Take your time with this one: it is a simple job when the glass is sound and a poor one when you rush the clean-up.
- Dry the screen and clear the area, then lay a towel in the tray in case something drops.
- Pull the old strip off the glass from one end, using a plastic scraper for any stubborn, hardened sections.
- Clean the glass edge with a mild detergent and a microfibre cloth, then let it dry completely.
- Cut the new strip slightly long with a sharp knife, then press it onto the glass edge from the top down.
- Trim the excess and check that the strip sits evenly with no wrinkles or gaps at the corners.
- Close the door slowly and check that it latches and that the strip compresses evenly against the opposite edge.
How to fix a shower screen door that drags, leaks or won’t close
Before replacing parts, work through these checks, because many leaks come from adjustment rather than worn seals.
- Check that the screen is level and plumb, since a slightly twisted frame makes the door drag and leave a gap at the bottom.
- Tighten the hinge screws gently and test again; over-tightening can chip the glass or crush the rubber pads.
- Inspect the bottom seal for flattening, as a worn blade lets water run underneath the door.
- Look for cracked silicone around the frame and tray, and reseal the joint after the area has dried for the time the silicone label states.
- Check the door catch or magnet to see if it has shifted or lost strength, which stops the door sealing.
- Book a licensed plumber for leaking waterproofing or cracked tray joints, because failed waterproofing is not a handyman repair.
Shower screen pivot hinge replacement parts
A tired pivot hinge makes the door drop and the seal rub, so replace the hinge before you blame the strip.
- Identify the brand and model from any stamp on the hinge or from the screen paperwork, then ask the maker for the matching part.
- Match the pivot style: top and bottom pin, glass-clamp or wall-mounted, because they are not interchangeable.
- Check the finish and glass thickness range, and buy a pack with spare gaskets or shims if offered.
- Support the door on a second person’s hands or on blocks while you swap the hinge, since toughened glass is heavy and hard to hold alone.
- Replace both hinges together if one is worn, so the load is shared and the door stays level.
- Stop and call a glazier if you see chips or cracks around the hinge cut-outs, because the glass may fail under stress.
Shower door pivot hinge replacement: step by step
- Have a second person hold the door, or rest it on padded blocks so the weight is off the hinges.
- Loosen the hinge screws or grub screws with the correct driver, keeping every washer and gasket in a tray.
- Lift the door slightly and ease it off the old hinge, taking care not to knock the glass edge on the tiles.
- Fit the new hinge to the wall or frame following the maker’s instructions, checking it is level before tightening.
- Re-hang the door, adjust for an even gap and check the seal touches evenly along its length.
- Leave the screws snug but not overtight, and recheck after a week of use.
Common mistakes with a shower door seal strip
- Buying a profile by eye, then finding it is the wrong thickness and pops off the glass after a few showers.
- Gluing or siliconing a strip that is meant to clip on, which makes the next replacement harder and can mark the glass.
- Skipping the clean-up, so soap scum and old residue stop the new seal gripping the glass.
- Over-tightening hinges and cracking the glass edge, a mistake that turns a cheap repair into a glass replacement.
- Drilling into wet-area walls in a pre-1990 home without checking for asbestos in the lining first.
- Sealing over mould instead of removing it, so the black spots return behind the new strip.
Cost to hire a handyman for shower screen seal and door repairs in Sydney
| Job | Low | Typical | High |
|---|---|---|---|
| Handyman hourly rate, Sydney | $57 | $105 | $140 |
| Call-out or minimum charge, Sydney | $92 | $140 | $170 |
| Weatherproofing or caulking | $115 | $205 | $345 |
| Door repair or adjustment | $115 | $185 | $320 |
| Half-day handyman, Sydney (4 hours) | $230 | $415 | $645 |
| Full-day handyman, Sydney (8 hours) | $435 | $690 | $1025 |
- A seal swap alone often falls under the call-out minimum, so bundle it with other bathroom or door jobs.
- Replacement glass, leaking waterproofing and new fixed panels need a glazier or licensed plumber, not a handyman.
FAQ: shower door seal strip
How to fix a shower screen door?
Check that the screen is level, tighten the hinge screws gently, replace a worn bottom seal and reseal any cracked silicone. If the door still drops or drags, replace the pivot hinge. Call a glazier for chipped or cracked glass, and a licensed plumber for leaking waterproofing.
How do I know which shower door seal strip to buy?
Match the position (bottom, side or hinge edge), the glass thickness and the gap it must close. Take a cut sample or a clear photo of the profile end to a bathroom supplier, or ask the screen’s maker for the part number.
Can I replace a shower glass door seal myself?
Yes, in most cases. A clip-on strip needs only a knife, a cloth and a tape measure. Hanging or removing a heavy door needs a second person, and cracked glass should be left to a glazier.
Is shower screen pivot hinge replacement a handyman job?
Often yes, if the hinge fits standard glass and the glass is sound. A handyman can swap hinges and re-hang the door, while glass replacement and waterproofing repairs need a glazier or licensed plumber.
Getting a shower door seal strip fitted in Sydney
If you would rather not wrestle a glass door, we can swap your seals and hinges, reseal the frame and flag anything that needs a plumber or glazier. Book a Sydney handyman for your shower door seal strip, and read the door handle replacement guide, loose door knob guide, standard door sizes, kitchen cabinet doors guide, garage door seals and garage door remote guide for other door jobs.


