How to Hang Pictures in a Rental: Step-by-Step Guide

How to hang pictures in a rental: ask your landlord or agent for written consent, then use adhesive strips, picture hooks or a freestanding display, and keep the packaging so you can match the weight rating. The biggest mistake is drilling or hammering first and asking later, because the repair and the argument over your bond both land on you.

This guide covers how to hang pictures in a rental step by step, how to hang things in a rental without drilling, what NSW tenants can ask for, and what a handyman charges in Sydney if you want the job done once and neatly.

Key points

  • Most renters can finish in about six steps: ask, pick a no-damage method, clean the wall, mark the spot, hang, then test before you load it.
  • A spirit level is the one tool you can’t skip, because crooked frames get re-hung and every extra hole is a mark on your bond.
  • In NSW a landlord cannot unreasonably refuse picture hooks, nails or screws for frames, but you still need to ask first, and you pay unless you agree otherwise.
  • A Sydney handyman typically charges about $125 per visit for picture or shelf hanging (range $80–$205, October 2026), and a minimum charge usually applies.

How to hang pictures in a rental: can you DIY it?

Light frames are easy for any tenant. Use this table to check your situation before you touch the wall.

Your situationDIY OK?Why
Light frame on painted plasterboardYes, with consentAdhesive strips or a small picture hook leave little or no mark when you follow the packet instructions.
Heavy mirror or large artworkAsk a handymanIt needs a stud or a properly rated anchor, and a fall can hurt someone and wreck the wall.
Wallpaper, textured paint or fresh paintTest firstAdhesive strips can lift paint or paper, so test a hidden corner and wait for new paint to cure fully.
Tiled wall or splashbackNo drillingTiles crack easily, and NSW consent rules for securing items to walls exclude tiled walls.
Home built or renovated before 1990Check firstWalls, eaves and wet areas may contain asbestos, so never drill or sand suspect sheeting.
Strata unit or heritage propertyCheck the rulesExtra limits apply in strata and on heritage homes, so confirm with your agent and the owners corporation.
Picture lights or anything hardwiredNoNew wiring is electrical work, so you must use a licensed electrician in NSW.

Tools and materials for hanging pictures in a rental

ItemWhat it’s forTip
Adhesive hanging stripsHold light frames with no holeCheck the weight rating on the packet for each strip, and never load them to the limit.
Small picture hooks and pinsLeave a tiny pinhole in plasterboardUse only after written consent, and choose hooks rated above the frame’s weight.
Spirit level or laser lineKeeps rows and frames straightLevel the frame on the wall before pressing strips down, because they rarely forgive a second go.
Tape measure and pencilMarks the hanging pointUse a light pencil mark or painter’s tape that wipes off cleanly.
Isopropyl wipes or damp clothCleans dust and greaseAdhesive fails on dusty or greasy walls, especially in kitchens and near stoves.
Picture rail hooksHang frames from an existing railMany older Sydney terraces and units already have a rail, which means no holes at all.
Stud finder with cable detectionFinds framing, cables and pipesNeeded only if your landlord approves screws; scan before any hole goes in.

How to hang pictures in a rental: step by step

Allow time to ask first, because the best method depends on the answer.

  1. Check your lease and ask your landlord or agent in writing whether you can hang frames, and which method they accept for painted or papered walls.
  2. Weigh the frame on bathroom scales, then compare it with the weight rating printed on the strips or hooks, leaving a generous margin.
  3. Choose the method: adhesive strips for light frames, picture rail hooks where a rail exists, or small hooks if the landlord approves a pinhole.
  4. Clean the spot with a damp cloth or alcohol wipe, let it dry fully, and test one strip in a hidden corner first.
  5. Lay out the arrangement on the floor, then mark the hanging points with painter’s tape and check them with a spirit level.
  6. Press each strip or hook firmly as the instructions say, holding it for the time on the packet, then wait before hanging anything.
  7. Hang the frame, step back and check it is level, and adjust now rather than lifting strips later.
  8. Press down on the frame, give it a gentle tug, and recheck after a day before adding more frames or heavier pieces.

How to hang things in a rental without drilling

You don’t need a hole for most light décor, and a no-drill approach often earns a quicker yes from the agent.

  • Lean large frames on a shelf, sideboard or the floor against the wall, which suits heavy mirrors that you cannot safely hang.
  • Use adhesive strips for light frames and hooks, then remove them slowly by stretching the tab along the wall as the packet directs.
  • Try over-door hooks or a tension rod for light items in wardrobes, bathrooms and laundries where wall adhesive struggles.
  • Choose a freestanding picture ledge, ladder shelf or easel when you want to swap artwork often without touching the wall.
  • Hang lightweight plug-in festoon lights from existing hooks, as in our festoon lights guide, and leave any wiring changes to an electrician.
  • Look for an existing picture rail, because a picture rail hanging system takes frames with no holes in the wall.

What NSW renters can ask for when hanging things

NSW law lets you ask for minor changes, and a landlord cannot unreasonably refuse the ones below.

  • Picture hooks, nails or screws for hanging frames are on the list of minor changes, so you can ask in writing for consent.
  • Securing tall furniture to a wall for safety is also covered, except on a tiled wall, which matters if you have young children.
  • Fly screens, internal curtains, removable blinds, indoor child safety gates and window safety devices are covered as well.
  • The tenant pays for the change unless the landlord agrees otherwise, so keep receipts and any written agreement.
  • Heritage properties and homes on the loose-fill asbestos register are excluded, and strata and social housing have extra limits.
  • Take dated photos of the wall before and after, then repair pinholes as agreed so the final inspection stays friendly.

Hanging heavy items in a rental

Mirrors, shelves and bookcases need a real fixing, and that takes more than strips.

  • Get written consent for screws, then find a stud with a detector that also senses cables and pipes before you mark anything.
  • Avoid the vertical and horizontal lines running from power points and switches, where cables usually travel inside the wall.
  • Choose fixings by the packet’s weight rating, never by guesswork, and follow the maker’s instructions for plasterboard, brick or tile.
  • Read our heavy mirror hanging guide and our picture hanging guide before you commit to a fixing.
  • Use a second person for anything above shoulder height or very heavy, because dropped glass and a fall from a ladder are the real risks.
  • Do not drill into old sheeting in a pre-1990 home until you have checked the NSW asbestos safety guidance and treated suspect material as asbestos.

Common mistakes when you hang pictures in a rental

  • Hammering a nail first and asking afterwards, which can breach the lease and cost you part of your bond.
  • Trusting the strip’s rating without weighing the frame, so heavier glass frames peel off the wall overnight.
  • Skipping the cable and pipe scan before you drill, then hitting wiring that runs straight above a power point.
  • Hanging by eye instead of using a spirit level, which leaves a row of frames that slowly drifts out of line.
  • Pressing strips onto dusty, greasy or freshly painted walls, which weakens the grip and can pull the paint off on removal.
  • Ignoring asbestos risk in homes built or renovated before 1990, especially in eaves, bathrooms and old fibro sheeting.

When to call a handyman to hang things in your rental

  • You have a large mirror, a gallery wall or a heavy shelf and the packet rating of a no-drill option is not enough.
  • Your landlord has approved screws, but there is no stud where the artwork needs to sit.
  • The wall is tiled, rendered, brick or part of a pre-1990 home where cracking or hidden asbestos is a risk.
  • The job is above shoulder height or needs a ladder, and nobody is available to help you hold it safely.
  • You need picture lights or any new wiring, which is work for a licensed electrician such as TQN Electrician.
  • You are close to your lease end and want pinholes filled and finished neatly before the final inspection.

Cost to hang pictures in a rental in Sydney

Prices include GST and come from October 2026 Sydney handyman data. Our picture frames guide helps if you are building or buying frames first.

JobLowTypicalHigh
Picture or shelf hanging, Sydney (per visit)$80$125$205
Handyman hourly rate, Sydney$57$105$140
Call-out or minimum charge, Sydney$92$140$170
Half-day handyman, Sydney (4 hours)$230$415$645
Full-day handyman, Sydney (8 hours)$435$690$1,025
  • The call-out charge applies even to a five-minute fix, so bundle every hanging job into one visit.
  • A full day can cost less than eight hours billed hourly, which suits a unit with a gallery wall, shelves and curtains.
  • Ask whether the quote includes fixings and whether the agent has approved the method before the handyman arrives.

FAQ: how to hang pictures in a rental

How do you hang pictures in a rental without losing your bond?

Ask for consent in writing, then use adhesive strips or picture rail hooks that leave no hole. Check the packet’s weight rating, clean the wall first and take dated photos before and after. If the landlord approves hooks or nails, repair any pinholes as agreed before you leave.

How do you hang things in a rental?

Pick the lightest method that holds the item: adhesive strips, over-door hooks, a tension rod, a picture ledge or a freestanding unit. For heavier pieces, get written consent and use a stud or rated anchor. NSW law lets tenants ask for hooks, nails and screws for frames, and the landlord cannot unreasonably refuse.

Can a landlord say no to picture hooks in NSW?

A NSW landlord cannot unreasonably refuse picture hooks, nails or screws for hanging frames, but you must ask first and you pay unless you agree otherwise. Heritage properties and loose-fill asbestos register homes are excluded, and strata and social housing have extra limits. Always get the answer in writing.

Do adhesive strips damage walls?

They can lift paint, wallpaper or fresh paint if the surface is dusty, textured or not fully cured. Test a hidden corner, follow the removal method on the packet, and stretch the tab slowly along the wall. If a strip leaves a mark, a handyman can patch and touch it up.

Getting your rental hung and finished neatly

If you’d rather not risk the bond, we can hang frames, mirrors and shelves level, with the right fixings for your wall, once your landlord has approved the method. Book picture hanging in Sydney and bundle curtains, shelves or flat-pack assembly into the same visit. Start with our guide to hanging pictures if you own the place.