Sliding Mirror Wardrobe Doors Price in Sydney (2026 Guide)

Sliding mirror wardrobe doors price out at roughly $340 to $4,200 installed in Sydney, depending on the number of doors and whether they are off-the-shelf or made to measure (indicative — get itemised quotes). Opening width, frame finish, mirror quality and the condition of your tracks drive most of the difference.

This guide shows the price by door type and by city, what affects the quote, when DIY is sensible, and what a fair quote should list. We also cover the safety risks of heavy glass.

Key points

  • Off-the-shelf kits are the cheapest route at about $340 to $1,120 fitted, while made-to-measure sets can reach $4,200 (indicative — get itemised quotes).
  • The biggest cost driver is opening width, because more doors, more glass and more track all raise materials and labour.
  • The cheapest option is to replace worn rollers or tracks on existing doors, which often costs a fraction of new sets.
  • DIY is sensible for a kit in a standard opening with a helper, and a Sydney handyman typically charges about $185 for a comparable assembly job (range $92–$320, October 2026).

Sliding mirror wardrobe doors price: price table

The table shows indicative ranges for Sydney, with labour based on handyman rates where we have verified figures. Always get itemised quotes before you order.

JobMaterialsLabourTotal
Off-the-shelf two-door kit in a standard opening$250–$800 (indicative — get itemised quotes)$92–$320 (typical $185, flat-pack assembly rates)$340–$1,120 (indicative — get itemised quotes)
Made-to-measure two-door set$700–$2,000 (indicative — get itemised quotes)$200–$500 (indicative — get itemised quotes)$900–$2,500 (indicative — get itemised quotes)
Three-door or wide opening$1,200–$3,500 (indicative — get itemised quotes)$300–$700 (indicative — get itemised quotes)$1,500–$4,200 (indicative — get itemised quotes)
New tracks and rollers on existing doors$40–$150 (indicative — get itemised quotes)$115–$320 (typical $185, door repair rates)$155–$470 (indicative — get itemised quotes)
  • Removal and disposal of heavy old doors is sometimes extra, so ask whether it is included in the labour figure.
  • Safety-backed mirror is a specification to ask the supplier about, not an assumption, so check the product details.

Sliding mirror wardrobe doors price by city

Handyman labour is verified for Sydney and Melbourne; the door prices are indicative and follow supplier rather than city.

CityHandyman hourly rateCall-out or minimum charge
Sydney$57–$140, typical $105$92–$170, typical $140
Melbourne$52–$125, typical $94$84–$160, typical $125
BrisbaneGet quotes (indicative — rates vary by suburb)Get quotes
PerthGet quotes (indicative — rates vary by suburb)Get quotes
AdelaideGet quotes (indicative — rates vary by suburb)Get quotes
  • Brisbane, Perth and Adelaide handyman rates are not verified here, so ask for two or three itemised quotes in your suburb.
  • Door kits from national suppliers may carry freight or delivery charges that vary by region, so check these before you compare prices.

What affects the price of wardrobe doors

  • Opening width and height, since a wider opening needs more panels, a longer track and often a stronger header.
  • Frame finish, as plain white or silver frames cost less than timber-look, black or custom colours.
  • Mirror and panel mix, because full mirror panels cost more than part-mirror or painted panels.
  • Made-to-measure versus kit, where custom sizing adds both lead time and labour hours.
  • Floor and ceiling condition, because sloping slabs and bowed gyprock need packers and extra adjustment time.
  • Access, such as a second-floor unit with no lift, which adds time for carrying heavy boxes.
  • Removal of old doors, which can be heavy, awkward and need two people plus disposal.

DIY vs hiring a pro to fit wardrobe doors

FactorDIYHire a handyman
CostLowest, since you pay for the kit onlyAdds labour, but a visit often costs less than a mistake with glass
ToolsDrill, level, tape measure and a second personBrings packers, a level and the right bits
WeightMirrored panels are heavy and awkward to lift into tracksTrained to lift and hang with a helper
PrecisionTracks must be level or doors will creep and rubAdjusts rollers and guides until the doors sit evenly
Pre-1990 homesCheck for asbestos before drilling old sheetingAsks the same question and stops if material is suspect
LicensingFine for a kit, but a full built-in joinery job over $5,000 needs a licensed builderQuotes the small fit-out and refers the larger work

How to save on sliding wardrobe doors without cutting corners

  1. Measure the opening three times at the top, middle and bottom, and use the smallest reading when you order a kit.
  2. Compare an off-the-shelf kit from Bunnings or IKEA with a made-to-measure quote before you commit to the dearer option.
  3. Replace worn rollers and tracks first, because tired hardware is often the real problem and new doors can be avoided.
  4. Pick a part-mirror or painted panel layout, which usually costs less than full mirror on every door.
  5. Book the fit alongside other small jobs, like hanging a heavy mirror, to share one call-out charge.
  6. Ask each supplier what is included in the price and what is extra, then compare line by line.

What a fair quote for wardrobe doors should include

  • An itemised list of doors, tracks, rollers, trim and any packers, so you can compare quotes properly.
  • Measure-up and delivery details, including who measures the opening and what happens if it is wrong.
  • Removal and disposal of the old doors, including the heavy glass or timber panels.
  • Access and second-person labour for lifting mirrors into the top track.
  • The tradesperson’s licence number and insurance details for any building work, because NSW requires a licence for residential building work valued at more than $5,000.
  • A written contract for larger jobs: under $20,000 uses a small jobs contract, and the maximum deposit before work starts is 10%.
  • A written workmanship warranty and the supplier’s product warranty terms, stated plainly and not left as a verbal promise.

FAQ: sliding wardrobe doors and mirrors

How much do sliding mirror wardrobe doors cost?

A fitted off-the-shelf kit often costs about $340 to $1,120, while made-to-measure sets can reach about $4,200 (indicative — get itemised quotes). Opening width and mirror type drive most of the difference, so measure first and compare quotes.

Can I fit sliding wardrobe doors myself?

Yes, if you have a standard opening, a level and a helper to lift the panels. Mirrors are heavy and the tracks must be level. If the floor or header slopes, or the doors are very wide, book a handyman for a safer result.

Are mirrored wardrobe doors safe?

Mirror can break, so ask the supplier whether the glass is safety-backed or laminated and follow their instructions. Keep tall mirrors away from where children play, and never lift a panel alone. Replace any cracked or chipped mirror straight away.

How much does a handyman charge to install wardrobe doors?

A Sydney handyman typically charges about $185 for a comparable flat-pack assembly job (range $92–$320, October 2026), plus any call-out or minimum charge. Made-to-measure installs may be quoted by the supplier instead, so ask who does the fitting.

Can I change wardrobe doors in a rental?

Ask your landlord in writing first, because wardrobe doors are fixtures and the rules for minor changes do not list them. Agree who supplies the new doors and who removes the old ones, and keep the originals in case you need to restore them.

Getting your wardrobe doors fitted in Sydney

If you’d rather not lift mirrored panels yourself, we can measure, fit and adjust wardrobe doors in a single visit. Our handymen bring levels, packers and the right fixings for your wall, and they will tell you if the opening needs bigger work. Book wardrobe door fitting in Sydney, and add a shower screen hinge adjustment or a picture hanging job to the same visit. Our guide to hanging pictures covers the wall fixings you may need.