Door replacement cost in Sydney runs from roughly $250 for a basic internal door to $4,500 or more for a timber front door fitted into a new frame (indicative — get itemised quotes). The door itself, the state of the existing frame, the lock and the hardware decide where you land in that range.
This guide covers door replacement cost for internal, front, screen, security and barn doors, plus when a handyman can do the job and when you need a licensed trade.
Key points
- Most internal doors fit a handyman visit: the door costs about $80 to $700 and fitting is usually one to two hours of labour (indicative).
- The biggest cost driver is the frame; if it is out of square or damaged, you are paying for carpentry, not just a new slab.
- The cheapest option is adjusting or repairing the existing door, which a Sydney handyman charges about $115 to $320 per job (typical $185).
- DIY suits standard hollow-core internal doors in square frames; external doors, security doors and anything structural suit a pro.
Door replacement cost: price table
The figures below cover supply and standard fitting into an existing frame (indicative — get itemised quotes).
| Door type | Door only | Fitting | Total |
|---|---|---|---|
| Hollow-core internal door | $80–$250 (indicative) | $100–$250 (indicative) | $180–$500 (indicative) |
| Solid-core internal door | $250–$700 (indicative) | $120–$300 (indicative) | $370–$1,000 (indicative) |
| Timber front door | $600–$3,000 (indicative) | $300–$1,500 (indicative) | $900–$4,500 (indicative) |
| Screen door | $150–$600 (indicative) | $100–$300 (indicative) | $250–$900 (indicative) |
| Security screen door | $400–$1,500 (indicative) | $150–$400 (indicative) | $550–$1,900 (indicative) |
| Barn door with track kit | $350–$1,300 (indicative) | $150–$450 (indicative) | $500–$1,750 (indicative) |
In older Sydney homes on settling sandstone footings, doors often stick because the frame has moved, not because the door is faulty.
Door replacement cost by city
Labour rates drive the difference between cities, so these verified handyman figures are the best guide for the fitting portion.
| City | Handyman hourly rate | Call-out or minimum | Door adjustment or repair |
|---|---|---|---|
| Sydney | $57–$140 (typical $105) | $92–$170 (typical $140) | $115–$320 per job (typical $185) |
| Melbourne | $52–$125 (typical $94) | $84–$160 (typical $125) | Similar to Sydney (indicative) |
| Brisbane | Get local quotes | Get local quotes | Similar to Sydney (indicative) |
| Perth | Get local quotes | Get local quotes | Similar to Sydney (indicative) |
| Adelaide | Get local quotes | Get local quotes | Similar to Sydney (indicative) |
What affects door replacement cost
Seven things move a quote up or down, in roughly this order.
- Door material: hollow-core is the cheapest, solid-core and timber cost several times more, and fire-rated or acoustic doors sit higher again (indicative).
- Frame condition: a square, sound frame means a quick swap, while rot, termite damage or movement adds carpentry hours at the hourly rate.
- Door size: non-standard heights and widths often need a made-to-order door, which costs more and takes longer to arrive; our standard door sizes guide shows what is off the shelf.
- Hardware: handles, hinges, latches and deadlocks vary widely in price, and any lock change needs a licensed locksmith.
- Finish: pre-hung and pre-painted doors cost more upfront but save a painter’s visit; raw doors need sealing on all six faces before hanging.
- Access and height: tight hallways, upper floors and heavy front doors need two people, which doubles labour for the carry and hang.
- Old paint and linings: homes built or renovated before 1990 may contain asbestos in linings, so test suspect material before cutting or sanding.
Screen door and security door installation cost
These are the most common add-on doors, and the price spread comes from the frame material and lock.
- A basic aluminium or timber screen door usually costs a few hundred dollars supplied, and a handyman can often hang it in about an hour (indicative).
- Security screen doors cost noticeably more, because of the steel or aluminium mesh, multipoint locking and the need for a tight fit on the frame (indicative).
- Measure the frame opening at top, middle and bottom, since older frames are rarely square and a poor fit leaves gaps that defeat the point.
- Choose a door with a closer and a safety latch you can release from inside, which matters in a fire or emergency.
- Ask the supplier about the lock and keying; if you want it keyed to your existing locks, book a licensed locksmith for that part.
- See our security screen doors cost guide for the full price breakdown by size and mesh type.
Front door installation cost
A front door is a bigger job than an internal swap, because it carries weather, security and appearance.
- Budget for the door, a new set of hinges and a deadlock, and allow for a weatherproof threshold and seals to stop water entering during storms (indicative).
- Timber doors in exposed positions need sealing on every edge before hanging, otherwise they swell and stick within a season or two.
- If the frame needs replacing, the work becomes carpentry and possibly building work; anything valued over $5,000 must be done by a builder licensed by Building Commission NSW.
- Heritage homes and conservation areas may restrict the style or material of a front door, so check with your council before ordering.
- Glazed doors should use safety glass, and any lock change or rekey belongs with a licensed locksmith, not a general handyman.
- Our bifold doors cost guide compares the price of a whole glass wall if you are rethinking the opening.
Cost of internal doors and barn doors
Internal doors are the best DIY door job, and barn doors suit rooms where a swing door loses floor space.
- A standard hollow-core door in a square frame is a DIY job of about an hour with a chisel, drill, level and a helper.
- Check which way the door swings and which side the hinges sit before you buy, because returns are limited on cut or modified doors.
- Top mount barn door hardware needs a solid fixing: screw the rail into timber studs or a mounted header board, never plasterboard alone, and follow the kit’s instructions.
- Allow wall clearance of at least the door width on one side so the barn door can slide fully open, and check the skirting does not block it.
- To lock a barn door, use a surface bolt, hook-and-eye or a purpose-made barn door latch on the inside for privacy only; use a licensed locksmith for any keyed lock.
- Floor guides stop a barn door swinging, but fit them after the door is hung so the gap is even along the full travel.
Door replacement cost: DIY vs hiring a pro
| Situation | DIY | Hire a pro |
|---|---|---|
| Standard internal door, square frame | Yes, with a helper and basic tools | Optional; handyman hourly rate applies |
| Sticking or sagging door | Often yes, by tightening hinges or planing | Door adjustment about $115–$320 per job (typical $185) |
| Front door or heavy external door | Only if experienced; the weight is a real injury risk | Yes; two people and sealed edges matter |
| New or widened opening | No | Licensed builder; structural work needs approval |
| Lock change or rekey | No | Book a licensed locksmith |
| Doors in a pre-1990 home with suspect linings | Test before cutting or sanding | Treat as asbestos if unsure; do not disturb it |
How to save on door replacement cost
- Try adjusting the existing door first; tightening hinges or easing a sticking edge costs far less than a new door.
- Buy a pre-hung unit when the frame is damaged, since the door and frame arrive matched and fitting takes less time.
- Replace several doors in one visit so the handyman’s call-out or minimum charge is spread across the whole job.
- Supply the door and hardware yourself when you are confident of the size, and ask the handyman to quote labour only.
- Paint raw doors yourself before the visit, using a primer on all six faces, so the fitter does not wait on drying.
- Compare itemised quotes for the same door, hardware and finish before you commit, and keep deposits at or under 10%.
What a fair door quote should include
- Itemised materials: the door, hinges, handle set, seals and any threshold, each priced separately so you can compare suppliers.
- Labour: hours or a fixed price for removal, fitting, adjustment and clean-up, plus the call-out or minimum charge.
- Making good: filling old hinge and latch recesses, touch-up painting and patching the frame, or a clear exclusion note.
- Waste removal: taking the old door away, which some tradies charge for when the door is large or glazed.
- Access: extra time for stairs, tight corridors and upper floors, written into the quote rather than added later.
- Licence and warranty: licence details where required, written terms for workmanship, and a written contract for larger jobs.
FAQ: door replacement cost
How much is a door?
A basic hollow-core internal door costs from about $80, while a timber front door can reach $3,000 before fitting (indicative — get itemised quotes). Fitting adds labour at the handyman hourly rate, typically $105 an hour in Sydney, plus any frame repairs.
How do you lock a barn door?
For privacy, fit a surface bolt, hook-and-eye or barn door latch on the inside face. These stop the door sliding but are not security locks. If you want a keyed lock, book a licensed locksmith so the lock suits the door thickness.
Can I replace an internal door myself?
Yes, if the frame is square and the new door matches the old size. Remove the old door, transfer the hinge recesses, hang the new one with a helper and check the gap is even. If the frame is damaged, call a handyman.
Do I need a licensed builder to replace a door?
Not for a like-for-like swap in an existing frame. A new or widened opening is structural, and residential building work valued at more than $5,000 must be done by someone licensed by Building Commission NSW.
Getting a door replaced in Sydney
If you would rather not wrestle with a heavy door, we can measure up, hang the new door and fit the hardware in one visit. Our handymen also fix sticking doors, which often saves a replacement. Book door replacement in Sydney and add any other small jobs, or compare frame and glass options in our double glazed windows cost guide.


