The double glazed windows price for a standard Sydney window usually sits around $700 to $2,500 supplied and installed (indicative — get itemised quotes). Frame material, window size, glass specification and whether you are replacing the whole frame or only the glass drive most of that spread.
This guide gives you the double glazed windows price by type, size and city, explains what pushes quotes up, compares single and double glazing, and shows when a DIY option makes sense.
Key points
- Expect roughly $700 to $2,500 per standard window installed, and about 30% to 60% more than single glazing (indicative — get itemised quotes).
- Frame material and window size are the biggest cost drivers, followed by glass specification, access and the cost of removing the old window.
- The cheapest route is usually fitting double glazed units into your existing sound frames, or adding a secondary glazing panel inside the room.
- DIY suits secondary glazing and minor sealing only; replacing glass units or frames is licensed building work once the job passes $5,000.
Double glazed windows price: price table by window type
Use this table to see what a single standard window costs before you compare quotes. Every figure is indicative, so treat it as a starting point and get itemised quotes.
| Window type | Materials | Labour | Total installed |
|---|---|---|---|
| Small awning or fixed window | $350–$900 (indicative) | $150–$400 (indicative) | $500–$1,300 (indicative) |
| Standard aluminium window | $500–$1,400 (indicative) | $200–$500 (indicative) | $700–$1,900 (indicative) |
| uPVC double glazed window | $700–$1,900 (indicative) | $250–$600 (indicative) | $950–$2,500 (indicative) |
| Timber double glazed window | $900–$2,400 (indicative) | $300–$700 (indicative) | $1,200–$3,100 (indicative) |
| Large sliding or bifold window | $1,200–$3,500 (indicative) | $400–$900 (indicative) | $1,600–$4,400 (indicative) |
| Replacement glass unit only | $250–$800 (indicative) | $100–$300 (indicative) | $350–$1,100 (indicative) |
- Check that a quote lists each window separately by size and frame type, because a single lump sum hides where the money goes.
- Ask whether the figure includes GST, removal of the old window and making good the reveal, as some quotes leave these out.
- Older Inner West terraces often have odd-sized timber openings, which push a quote towards custom-made units rather than stock sizes.
Double glazed windows price per m2 and by size
Installers often quote by window, but a rough rate per square metre helps you sense-check large openings and compare suppliers.
| Measure | Typical range | Notes |
|---|---|---|
| Double glazing windows price per m2, aluminium | $450–$900 (indicative) | Includes frame and standard clear glass; excludes removal and making good. |
| Double glazed windows price per m2, uPVC | $600–$1,200 (indicative) | Better thermal performance, with frames that need no repainting. |
| Double glazed windows price per m2, timber | $750–$1,500 (indicative) | Highest cost, and popular for heritage-style homes. |
| Low-E or laminated glass upgrade | Add $100–$300 per m2 (indicative) | Improves heat control or security and noise performance. |
| Very small windows under one square metre | Often priced per unit (indicative) | Fixed overheads make the rate per m2 look high. |
- Measure the width and height in millimetres, multiply them and convert to square metres, then compare each quote on the same basis.
- Expect the rate per m2 to fall on bigger windows, since delivery, hardware and installation time spread over more glass.
Double glazing windows cost by city
Sydney is first because most of our jobs are here. These are indicative ranges for one standard aluminium double glazed window installed, so check them against local quotes.
| City | Low | Typical | High |
|---|---|---|---|
| Sydney | $700 (indicative) | $1,200 (indicative) | $1,900 (indicative) |
| Melbourne | $650 (indicative) | $1,100 (indicative) | $1,800 (indicative) |
| Brisbane | $650 (indicative) | $1,100 (indicative) | $1,800 (indicative) |
| Perth | $650 (indicative) | $1,150 (indicative) | $1,850 (indicative) |
| Adelaide | $600 (indicative) | $1,050 (indicative) | $1,750 (indicative) |
What affects the double glazed windows price
Two houses with the same number of windows can receive quotes thousands of dollars apart. These are the usual reasons.
- Frame material: uPVC and timber frames cost more than standard aluminium, often adding several hundred dollars per window (indicative — get itemised quotes).
- Window size and style: large sliding and bifold units need heavier hardware and two installers, so the price rises faster than the glass area.
- Glass specification: low-E coatings, argon fill, laminated or acoustic glass each add cost per square metre (indicative — get itemised quotes).
- Replacing the whole window versus only the glass unit: keeping a sound frame can save 30% or more (indicative — get itemised quotes).
- Access: second-storey windows may need scaffold or a lift, and tight side passages in Sydney terraces slow the crew down.
- Wall type and condition: brick reveals, rotten timber sills or old render all need making good, which adds labour (indicative — get itemised quotes).
- Pre-1990 homes: old putty, sheeting or sill linings may contain asbestos, so check asbestos.nsw.gov.au and treat suspect material as asbestos before anyone cuts or sands it.
- Lead time and custom sizing: made-to-measure units from suppliers such as Stegbar take longer and cost more than stock sizes (indicative — get itemised quotes).
Single vs double glazed windows cost: how much more expensive are they?
Double glazing usually costs more upfront, but it cuts heat loss, condensation and street noise. The table compares the two options for one standard window.
| Factor | Single glazed | Double glazed |
|---|---|---|
| Installed price per standard window | $400–$1,200 (indicative) | $700–$2,500 (indicative) |
| Extra cost over single glazing | Baseline | About 30% to 60% more (indicative) |
| Heat and cold | Loses and gains heat quickly | Holds indoor temperature better in summer and winter |
| Noise | Little reduction | Noticeable improvement near busy roads and flight paths |
| Condensation | Common on cold mornings | Far less on the inner pane |
| Weight | Light, easy to handle | Heavier, so frames and hardware must suit |
- Work out payback with your own energy bills, because savings vary with window area, orientation and how often you run heating and cooling.
- Prioritise west-facing living rooms and bedrooms facing the street, where the comfort and noise gains show up first.
Cost to replace a double glazed window or double glaze existing windows
You do not always need new frames. These are the main routes for double glazing existing windows, from cheapest to most expensive.
- Secondary glazing panel: a second pane fitted inside the existing frame, often the cheapest option, at about $300 to $900 per window (indicative — get itemised quotes).
- New double glazed unit in the existing frame: works only if the frame is sound and deep enough, and it typically costs $350 to $1,100 (indicative).
- Replace a failed sealed unit: fog between the panes means the seal has gone, and a glazier can swap the unit for $350 to $1,100 (indicative).
- Full window replacement: new frame and glass together, suiting rotten timber or bent aluminium, at the prices in the table above.
- Replace the sash only: some timber windows allow new double glazed sashes while keeping the original frame and look (indicative — get itemised quotes).
- Whole-house package: 10 windows can easily pass $5,000, which is the point where NSW requires a licensed builder, so confirm the licence number.
UPVC double glazed windows cost compared with aluminium and timber
Frame choice shapes both price and maintenance. Compare them before you fall in love with a showroom sample.
| Frame | Price level | Strengths | Watch out for |
|---|---|---|---|
| Aluminium | Lowest to mid (indicative) | Slim, strong, widely stocked, many colours | Conducts heat unless it has a thermal break. |
| uPVC | Mid to high (indicative) | Good insulation, no repainting, quiet | Fewer colours and thicker sightlines on large spans. |
| Timber | High (indicative) | Classic look, suits heritage-style homes | Needs regular painting and sealing, especially on west walls. |
| Composite or timber-aluminium | Highest (indicative) | Timber inside, low maintenance outside | Long lead times and specialist installers. |
- Ask the supplier for the manufacturer’s installation instructions and warranty terms in writing, rather than relying on a brochure claim.
- Check strata rules and any heritage or conservation-area limits with your council before you order, since frame style and colour may be restricted.
DIY double glazed windows vs hiring a pro
Some parts of the job are fair game for a confident DIYer. Others are not, because glass is heavy and a badly sealed unit fails early.
| DIY double glazed windows | Hire a pro |
|---|---|
| Secondary glazing kits from Bunnings or online suit renters and small openings, with the landlord’s consent first. | Replacing a glass unit or frame needs correct measuring, packers, sealing and flashing. |
| Resealing around a frame with Sika or Selleys sealant is a sensible weekend task. | Large panes weigh a lot and need two or more people and suction lifters. |
| Adding weather seals or draught strips to old sashes is cheap and low risk. | Second-storey windows need ladders, scaffold or a lift, and falls are a real risk. |
| Savings come from your labour, which a Sydney handyman charges at about $57 to $140 per hour. | Residential building work over $5,000 must be done by someone licensed by Building Commission NSW. |
| You carry the risk if a unit fogs or leaks, and a DIY fit may void a supplier warranty. | A licensed installer works to the manufacturer’s instructions and stands behind the install. |
How to save on double glazed windows without cutting corners
- Get at least three itemised quotes on the same specification, so you compare like with like rather than headline totals.
- Glaze the rooms that matter most first, usually the west-facing living area and street-facing bedrooms, and stage the rest.
- Keep sound frames and replace only the glass units, which suits many aluminium windows from the 1990s onward.
- Choose stock sizes where openings allow, because made-to-measure units add cost and weeks to the lead time.
- Book installation in quieter months, when installers have gaps in their schedule and may discount (indicative — get itemised quotes).
- Do the small prep yourself, such as clearing furniture, removing blinds and moving plants, so the crew works faster.
- Check rebates or finance with your energy retailer and state government, as offers change and eligibility rules apply.
What a fair double glazed windows quote should include
- Itemised materials for each window, including frame type, glass specification and any coating or laminated layer.
- Labour, removal and disposal of the old windows, plus making good of the reveals, sills and internal linings.
- Access costs such as scaffold, lifts or glass handling equipment for upper floors.
- Written warranty terms for the frame, glass and installation, with start dates and what voids them.
- The contractor’s licence number, so you can check it with Building Commission NSW before you pay anything.
- A written contract: small jobs under $20,000 use a small jobs contract, and the maximum deposit before work starts is 10%.
Door and gate costs people search alongside double glazing windows
Window quotes often lead to door questions. These guides cover each one, and the table shows where each job belongs.
| Job | Where to start |
|---|---|
| Sliding door replacement | See our sliding door cost guide for glass and track options. |
| Garage door supply and install | Read the garage door cost guide, and the roller door prices guide for roller types. |
| Garage door repair and replacement parts | The garage door repair cost guide lists typical repairs; leave spring work to a garage door technician. |
| Security screen doors | Compare options in the security screen doors cost guide. |
| Internal and external door replacement, including Polytec thermolaminated and fire doors | The door replacement cost guide covers slab and frame costs; fire doors must be certified and installed to the manufacturer’s instructions. |
| Bifold doors and sliding gate cost | Start with the bifold doors cost guide; fencing and Colorbond gates belong with a licensed builder. |
| Door adjustment or minor repair in Sydney | A handyman typically charges $115 to $320 per job, with about $185 typical. |
FAQ: double glazed windows price
How much are double glazed windows?
A standard double glazed window in Sydney usually costs about $700 to $2,500 supplied and installed (indicative — get itemised quotes). Small fixed windows sit at the low end, while large sliding units and timber frames sit at the top. Always compare itemised quotes on the same specification.
How much more expensive are double glazed windows?
Double glazed windows typically cost about 30% to 60% more than single glazed windows of the same size and frame (indicative — get itemised quotes). Glass specification and frame material change the gap. Many owners accept the premium for comfort, quieter rooms and less condensation.
How much is double glazed windows per square metre?
Expect roughly $450 to $1,500 per square metre depending on frame material, with aluminium cheapest and timber dearest (indicative — get itemised quotes). Small windows cost more per square metre, and low-E or laminated glass adds to the rate. Removal and making good are usually extra.
How much for double glazed windows in a whole house?
A ten-window house commonly lands somewhere between $8,000 and $25,000 installed (indicative — get itemised quotes). Because that is well above $5,000, the work must be done by someone licensed by Building Commission NSW. Over $20,000 you also need a full contract and Home Building Compensation cover.
Can I double glaze existing windows?
Often yes. A secondary glazing panel fits inside the room and costs less than replacement, while a new sealed unit can go into a sound frame. Timber and older aluminium frames may be too shallow or weak, so a glazier should assess the frame before ordering anything.
Can I install double glazed windows myself?
You can fit secondary glazing and reseal edges, but replacing double glazed units or frames is a job for a licensed installer. Units are heavy, measuring errors are costly, and a faulty seal causes fogging. Renters need the landlord’s written consent before any change.
Getting double glazed windows quoted in Sydney
If you want a second opinion on a quote, or help with the smaller jobs around a window install, we can check your frames, reseal edges and handle minor repairs. Book a Sydney handyman for the finishing work, and use a licensed glazier or builder for new frames and glass units.
Related guides
- Roller door prices: sizes, types and installation
- Garage door repair cost: what each fix costs
- Garage door cost: supply and install
- Sliding door cost: glass, tracks and fitting
- Security screen doors cost and options
- Door replacement cost: internal and external
- Bifold doors cost: materials and installation


