TV Mounting: Complete Guide

Professional TV mounting in Sydney typically costs about $205 per job, with a range of $115 to $290 (October 2026), and the bracket is usually extra. The price moves with the wall type, the bracket style and whether you want cables hidden, and the biggest thing that goes wrong is the wrong fixing for the wall.

This guide explains what a TV wall mounting service includes, what pushes the price up, how TV mounting works step by step, and when a DIY mount is a bad idea.

Key points

  • A standard mount is a short job of about eight steps, and the cost is mostly labour, minimum charges and the bracket.
  • The one tool you can’t skip is a stud and cable detector, because hidden wiring and hollow plasterboard cause most failures.
  • Check for asbestos in homes built or renovated before 1990 before you drill into old sheeting, and anchor the TV or cabinet where children live.
  • A Sydney handyman charges about $205 to mount a TV (range $115–$290, October 2026), and a new power point behind it needs a licensed electrician.

Can you do TV mounting yourself?

Mounting a TV is a manageable DIY job on solid walls, but several situations are better left to a professional. Check this table before you buy a bracket.

Your situationDIY OK?Why
Timber stud wall and a flat or tilt bracketYes, with a helperFixing into the stud centres is simple, and the screen needs two people to lift.
Brick or concrete wallYes, with a hammer drillThe right masonry bit and anchors matter more than strength.
Plasterboard with no stud in the right spotLight TV onlyHollow-wall anchors must be rated above the combined weight; check the packet.
Full-motion arm on plasterboardNoAn extended arm multiplies leverage on the top fixings and needs studs or masonry.
Pre-1990 home with fibro or old sheetingCheck firstWall linings may contain asbestos, so don’t drill until you’ve identified the material.
New power point or hidden cables inside the wallNoElectrical work needs a licensed electrician in NSW, whatever the cost.
Rental propertyAsk firstGet the landlord’s written consent before drilling, and agree who patches the holes.

Tools and materials for TV mounting

ItemWhat it’s forTip
BracketHolds the screen on the wallMatch the VESA pattern on the back of the TV and stay within the bracket’s maximum weight and screen size.
Stud and cable detectorFinds studs, live wires and pipesScan twice, across and up, and avoid lines running from nearby power points and switches.
Drill and bitsPilot holes and anchor holesUse timber bits for studs and masonry bits with hammer mode for brick; Ryobi and Makita both make suitable drills.
Spirit levelKeeps the plate straightA long level beats the small bubble built into a bracket.
FixingsLag bolts, masonry anchors or hollow-wall anchorsUse fixings suited to your wall and check the packet rating; brands like Ramset list them.
Cable coverHides leads without wall workA paintable surface cover from Bunnings avoids opening the wall.

TV mounting step by step

You’ll need a second person to lift the screen. For the full method, wall by wall, read our guide on how to mount a TV on the wall.

  1. Check the VESA pattern and weight on the back of the TV, and confirm the bracket covers both with some margin.
  2. Mark the screen height with painter’s tape while seated, so the centre of the screen sits near eye level.
  3. Scan the wall for studs, cables and pipes, and mark each hit in pencil before you pick up the drill.
  4. Hold the wall plate on the marks, check it is level, and mark the fixing holes through the plate.
  5. Drill pilot holes to the depth the fixing maker states, and clear any dust out of masonry holes.
  6. Fix the plate with the right bolts or anchors, recheck the level, and tighten until firm but not crushed.
  7. Attach the arms to the TV with the spacers supplied, lift it with a helper and engage the safety locks.
  8. Tidy the cables in a surface cover, leave slack for tilting, and give each corner a gentle pull to test it.

What a professional TV mounting service includes

A tradesperson usually arrives with a detector, drills for each wall type and a spare set of fixings, which saves a second trip to the hardware shop.

  • Scanning for studs, cables and pipes before any hole is drilled, which is the step most DIY jobs skip.
  • Choosing and fitting the right fixings for plasterboard, brick, concrete or tile, rather than the plugs from the bracket box.
  • Levelling the wall plate, hanging the TV and testing the locks so the screen can’t lift off the arms.
  • Tidying leads in a surface cable cover or, where you’ve arranged it, recommending a licensed electrician for in-wall work.
  • Taking away packaging and cleaning up the dust, which matters in small Sydney units.
  • Checking the bracket is suitable for the wall before starting, and saying so if it isn’t.

TV mounting on plasterboard, brick and tile

Wall type is the largest single driver of how long a TV mounting job takes, so it also drives the quote.

  • Plasterboard on timber studs is the easiest and cheapest, as long as a stud falls where the TV needs to sit.
  • Plasterboard on steel studs needs fixings made for thin steel, so tell the installer what the wall is built from.
  • Double brick in older Inner West terraces wears out cheap drill bits, so expect a bit more time on site.
  • Tiled walls need a diamond or tile bit and a slow start, and tiles can crack if the hole is too close to an edge.
  • Fibro or old sheeting in a pre-1990 home must be treated as possible asbestos until identified, and the NSW asbestos site explains what to do next.
  • Hollow-core or lightweight walls often need a timber noggin or backing board fixed behind the plasterboard first.

Common mistakes with TV mounting

  • Using the plastic plugs from the bracket box in plasterboard for a heavy screen, instead of fixings rated for the weight.
  • Skipping the cable and pipe scan and drilling straight down from a power point or switch.
  • Trusting the small bubble on the bracket instead of a proper spirit level.
  • Overtightening bolts in plasterboard or soft timber until the lining crushes or the hole strips.
  • Ignoring asbestos risk in homes built or renovated before 1990 when drilling old sheeting.
  • Lifting a large screen alone, which risks a cracked panel, a dropped TV and a strained back.

When to call a handyman for TV mounting (or a licensed trade)

  • You can’t find a stud or solid wall where the TV needs to go, and the screen is too heavy for hollow-wall anchors.
  • You want a full-motion arm, a ceiling mount or a bracket above a fireplace, which usually needs a second person and proper backing.
  • The wall is tiled, rendered, fibro or part of a pre-1990 home with possible asbestos.
  • You want a power point added or moved behind the screen; book a licensed electrician such as TQN Electrician.
  • You’re renting and want clean, neat fixings so the holes can be patched at the end of the lease.
  • The screen is large, or you live alone and don’t have anyone to hold it while you hook it on.

TV mounting cost in Sydney

Prices include GST and come from October 2026 Sydney and Melbourne handyman data. A minimum charge applies even to a five-minute fix.

JobLowTypicalHigh
TV mounting, Sydney (per job)$115$205$290
TV mounting, Melbourne (per job)$105$190$260
Handyman hourly rate, Sydney$57$105$140
Call-out or minimum charge, Sydney$92$140$170
Picture or shelf hanging, Sydney (per visit)$80$125$205
Minor plastering or patching, Sydney (per job)$140$230$575
Half-day handyman, Sydney (4 hours)$230$415$645

FAQ: TV mounting

How much does professional TV mounting cost?

A Sydney handyman typically charges about $205 per job, with a range of $115 to $290 (October 2026). Expect more for a full-motion arm, a brick or tiled wall or a ceiling mount, and check whether the bracket and cable cover are included in the quote.

What does a TV wall mounting service include?

Most services scan the wall, fit the bracket with fixings suited to the wall, hang and level the TV, and tidy leads with a surface cover. The bracket is often extra, and any new power point must be done by a licensed electrician.

Is mounting a TV on the wall safe?

Yes, when it is fixed into studs or solid masonry with fixings suited to the weight. Product Safety Australia advises securing TVs to the wall or placing them at the back of cabinets, because tip-overs injure young children.

Can I mount a TV in a rental?

Ask your landlord in writing before drilling, and agree who patches the holes when you leave. NSW law lets tenants request some minor changes, but you still need consent first. A freestanding stand or a cabinet is an option if consent is refused.

Getting TV mounting done in Sydney

If you’d rather not work out the wall type, fixings and cable runs yourself, we can mount the TV level and secure in one visit. Our handymen bring detectors, masonry and tile bits and a range of anchors. Book TV mounting in Sydney and add any other small jobs to the same visit.