How much to renovate a kitchen in Australia depends mostly on the cabinetry, benchtop and how much plumbing or electrical you move. A basic refresh sits around $15,000 to $25,000 (indicative — get itemised quotes), while a full custom rebuild can pass $60,000 (indicative — get itemised quotes).
This guide gives price tables by quality level, city and kitchen size, explains what pushes the total up, and shows where you can save without cutting corners.
Key points
- A mid-range Sydney kitchen commonly lands between $25,000 and $45,000 (indicative — get itemised quotes), and the quote should list cabinets, benchtop, appliances, labour and waste removal separately.
- The biggest cost drivers are cabinetry, the benchtop material, and any move of the sink, cooktop or power points, because plumbing and electrical work needs a licensed trade.
- The cheapest route is to keep the layout, refresh doors and benchtops, and buy flat-pack or standard-size cabinets from Bunnings or IKEA.
- DIY suits painting, flat-pack assembly and silicone; any building work valued over $5,000 must be done by someone licensed by Building Commission NSW.
How much to renovate a kitchen: price table
These totals cover a typical 10 to 12 square metre kitchen, supply and install, and include GST. Treat them as a starting budget, not a quote.
| Level | Materials | Labour | Total |
|---|---|---|---|
| Cosmetic refresh (new doors, benchtop, splashback) | $6,000–$12,000 (indicative) | $3,000–$8,000 (indicative) | $10,000–$20,000 (indicative) |
| Basic rebuild (flat-pack cabinets, laminate top) | $9,000–$16,000 (indicative) | $6,000–$10,000 (indicative) | $15,000–$25,000 (indicative) |
| Mid-range (semi-custom cabinets, stone-look top) | $16,000–$28,000 (indicative) | $9,000–$17,000 (indicative) | $25,000–$45,000 (indicative) |
| High-end (custom joinery, engineered stone, new layout) | $30,000–$55,000 (indicative) | $15,000–$30,000 (indicative) | $45,000–$85,000 (indicative) |
- Appliances can add a large slice on top of these totals, so decide early whether the quote includes an oven, cooktop and rangehood or only the install.
- Prices rise noticeably for stone benchtops, soft-close hardware from brands like Blum, and any structural change such as removing a wall.
- If the total will pass $20,000, NSW law requires a full home building contract and Home Building Compensation cover, with a deposit capped at 10%.
| Cost item | Share of a typical budget | Why it matters |
|---|---|---|
| Cabinetry and hardware | 30%–40% (indicative) | The biggest line, so doors, drawers and hinges are the first place to compare. |
| Benchtops and splashback | 10%–20% (indicative) | Material choice and edge detail change this more than the area does. |
| Appliances | 10%–20% (indicative) | Reusing a working oven or fridge frees budget for joinery. |
| Labour and trades | 20%–35% (indicative) | Demolition, carpentry, plumbing, electrical and finishing each carry a separate charge. |
Cost of kitchen renovation by city
Sydney usually sits at the top of the range because of labour rates, access and parking. Handyman rates in the table below are verified for October 2026; the renovation totals are indicative.
| City | Mid-range kitchen total | Handyman hourly rate |
|---|---|---|
| Sydney | $25,000–$48,000 (indicative) | $57–$140 per hour, typically $105 |
| Melbourne | $24,000–$45,000 (indicative) | $52–$125 per hour, typically $94 |
| Brisbane | $22,000–$42,000 (indicative) | Ask for a local quote |
| Perth | $23,000–$43,000 (indicative) | Ask for a local quote |
| Adelaide | $21,000–$40,000 (indicative) | Ask for a local quote |
- Sydney terraces and units often mean a long carry, no parking and strata approval, all of which add labour time to the quote.
- Ask every tradie whether travel, waste removal and a skip bin are included, because these extras vary more than the headline price.
- Compare at least three itemised quotes in your own suburb rather than relying on a city average.
- Regional NSW can be cheaper on labour but dearer on delivery, so check freight on cabinets and stone before you compare totals.
What affects the cost of a kitchen renovation
Two kitchens of the same size can differ by tens of thousands of dollars once the choices stack up.
- Cabinetry is usually the largest line item; flat-pack carcasses with custom doors cost far less than fully custom joinery (indicative — get itemised quotes).
- Benchtops range from laminate through timber to engineered stone, and thicker edges and waterfall ends increase fabrication cost (indicative — get itemised quotes).
- Moving the sink, dishwasher or gas cooktop needs a licensed plumber or gasfitter, and relocating power points needs a licensed electrician.
- Pre-1990 homes may hide asbestos in wall sheeting, splashback backing or floor coverings, and testing and licensed removal add cost and time.
- Floors and walls often need patching after old cabinets come out; minor plastering and patching in Sydney runs about $140 to $575 per job, typically $230.
- Appliance choice swings the budget, with a basic freestanding oven far cheaper than a built-in steam oven and integrated dishwasher (indicative — get itemised quotes).
- Access matters too: a third-floor walk-up with no lift can add hours of carrying to the labour bill (indicative — get itemised quotes).
- Lighting, splashback tiles and tapware are small items that add up, so list them in the quote rather than leaving them as allowances.
Small kitchen and apartment kitchen renovation cost
A small galley or apartment kitchen costs less in materials, but labour and strata rules keep the saving smaller than you expect.
| Kitchen type | Typical scope | Total |
|---|---|---|
| Small kitchen, same layout | New doors, benchtop, handles, splashback | $8,000–$16,000 (indicative) |
| Small kitchen, new cabinets | Flat-pack or semi-custom, laminate or stone-look top | $14,000–$28,000 (indicative) |
| Apartment kitchen | New cabinets, appliances and strata paperwork | $15,000–$32,000 (indicative) |
| Kitchen upgrade only | Tapware, lighting, splashback and painting | $2,000–$6,000 (indicative) |
- Check your strata by-laws first, since many buildings restrict work hours, require a bond and ban removing waterproof membranes without approval.
- Measure twice and plan the layout on paper, because a few centimetres either way decides whether standard cabinet sizes fit.
- Choose lighter doors and open shelving in a tight kitchen so the room feels larger without adding cost.
DIY vs hiring a pro for your kitchen
You can do a lot of kitchen work yourself, but the licensed parts and the large building jobs are not optional.
| Task | DIY | Hire a pro |
|---|---|---|
| Painting walls and ceilings | Fine for most people | Book a licensed painter through TQN Construct for ceilings or whole-house work |
| Flat-pack cabinet assembly | Yes, with patience and a level | Sydney assembly is about $92 to $320 per job, typically $185 |
| Fitting handles and adjusting doors | Yes | Door repair and adjustment in Sydney is about $115 to $320 per job, typically $185 |
| Resealing silicone around sinks and splashbacks | Yes, with the right sealant | Sydney weatherproofing and caulking is about $115 to $345 per job, typically $205 |
| Moving taps, pipes or gas | No | Book a licensed plumber or gasfitter |
| Adding or moving power points, lights | No | Book a licensed electrician |
| Building work valued over $5,000 | No | Must be done by someone licensed by Building Commission NSW |
- Never remove old splashback sheeting, flooring or lining in a pre-1990 home before checking asbestos.nsw.gov.au and treating suspect material as asbestos.
- Do the demolition planning properly: turn off water and power at the source and book a licensed trade to disconnect the sink, cooktop and wiring.
- Get a second person for lifting wall cabinets, since an upper unit weighs more than it looks once it is loaded with plates.
How to save on a kitchen upgrade without cutting corners
Most savings come from decisions made before demolition starts, not from cheaper materials alone.
- Keep the sink, cooktop and fridge where they are, because every plumbing or electrical relocation adds licensed labour and wall repairs.
- Reface the cabinets with new doors and handles if the carcasses are sound, rather than replacing the whole kitchen.
- Buy standard-size flat-pack cabinets from Bunnings or IKEA and pay a tradie only for the install and benchtop template.
- Choose a laminate or compact benchtop, and spend the saving on quality hinges and drawer runners that you touch every day.
- Supply your own tiles and appliances if your contractor allows it, and confirm in writing who is responsible if an item arrives damaged.
- Group small jobs, such as assembling a pantry unit, rehanging a door and resealing a sink, into one handyman visit to spread the minimum charge.
Our bathroom renovation cost guide shows how the same savings apply to wet areas, and the epoxy grout guide helps if you want a tougher splashback finish.
What a fair kitchen renovation quote should include
An itemised quote makes it easy to compare tradies and spot gaps before work starts.
- Itemised materials: cabinets, benchtop, splashback, hardware, tapware and any allowance for appliances, each with a brand or model.
- Labour split by trade, so you can see demolition, carpentry, plumbing, electrical and tiling as separate lines.
- Access and protection: floor covering, dust barriers, strata lift booking and parking, which matter in Sydney units and terraces.
- Waste removal and site clean-up, including skip bin hire and tip fees, with an allowance if asbestos is found.
- Warranty terms in writing, plus the licence number for the builder and any plumber, gasfitter or electrician.
- A written contract with staged payments: a small jobs contract under $20,000, a full contract over $20,000, and a deposit of no more than 10%.
- Pair the renovation with small jobs such as mounting a TV in the adjoining room or hanging a curtain rod over the window while trades are on site.
- Ask the handyman to fix a damaged flyscreen in the same visit, so the minimum charge covers more than one job.
- If the old carpet in the next room needs replacing at the same time, the carpet replacement cost guide will help you budget.
- If the ensuite or powder room needs a quick tidy, see how to replace a toilet seat before you book a trade.
- Photograph the finished kitchen and keep the invoices, warranties and appliance manuals together in one folder for resale or insurance.
FAQ: how much to renovate a kitchen
How much to renovate a kitchen in Australia?
Most Australian kitchens cost between $15,000 and $45,000 to renovate (indicative — get itemised quotes), depending on size, cabinetry and appliances. A cosmetic refresh is cheaper, while custom joinery with stone benchtops and a new layout can pass $60,000. Always compare at least three itemised quotes.
How much does a new kitchen cost?
A new kitchen with flat-pack cabinets and a laminate top often sits around $15,000 to $25,000 installed (indicative — get itemised quotes). Semi-custom cabinets and stone-look benchtops move it into the $25,000 to $45,000 band. Appliances, plumbing and electrical are usually extra unless the quote says otherwise.
How much does a kitchen renovation cost for a small kitchen?
A small kitchen refresh with new doors and a benchtop may cost about $8,000 to $16,000 (indicative — get itemised quotes). Replacing the cabinets runs higher. Apartment kitchens add strata approval and access limits, so budget extra time and a possible bond before work begins.
How much for a kitchen upgrade without a full renovation?
A light upgrade covering new tapware, lighting, a splashback and paint can cost roughly $2,000 to $6,000 (indicative — get itemised quotes). Licensed plumbers and electricians must do any tap or light wiring. Handyman visits start from a call-out charge of about $92 to $170 in Sydney.
How much to redo a kitchen on a tight budget?
Keep the layout, reface the doors, replace the benchtop with laminate and add new handles, tapware and paint. That kind of refresh can cost roughly $8,000 to $15,000 (indicative — get itemised quotes). Do the painting and assembly yourself to save labour, but book licensed trades for plumbing and electrical work.
Do you need a licence to renovate a kitchen in NSW?
Residential building work valued at more than $5,000 must be done by someone licensed by Building Commission NSW. Plumbing, electrical and gasfitting work needs a licence regardless of cost. Ask for licence numbers on the quote and check them before you pay a deposit.
Getting your kitchen renovated in Sydney
If you want a clear idea of how much to renovate a kitchen before you commit, we can look at the room, handle the smaller jobs and line up licensed trades for the rest. Our handymen assemble cabinets, adjust doors, reseal sinks and tidy up after trades finish. For tapware, drains or waterproofing, book a licensed plumber through TQN Plumber, and for power points and lighting, book a licensed electrician through TQN Electrician. Book a handyman in Sydney for the finishing work.


