A house window replacement cost estimator for Australia starts with a typical installed price of about $500 to $2,500 per standard window, depending on frame material and glass (indicative — get itemised quotes). The frame type, the glass, the window size and the work to make good the surrounding wall drive most of the price.
This guide gives you a simple house window replacement cost estimator Australia homeowners can use, with prices for aluminium, timber and louvre windows, city comparisons, ways to save, and what a handyman charges for the small jobs around a window.
Key points
- Expect roughly $500 to $2,500 per standard window installed, with aluminium at the lower end and timber or double-glazed units higher (indicative — get itemised quotes).
- The biggest cost drivers are the frame material, the glass type, the size, and whether the wall or lintel needs repair.
- The cheapest option is often repairing seals, glass or flyscreens rather than replacing the whole window.
- DIY suits flyscreens, seals and small repairs only; whole-window replacement over $5,000 in total needs someone licensed by Building Commission NSW.
House window replacement cost estimator Australia: price table
These figures cover typical Sydney jobs for a standard-sized window, including supply and installation. Treat them as a planning range rather than a quote.
| Window type | Materials | Labour and making good | Total installed |
|---|---|---|---|
| Aluminium window (standard sliding or awning) | About $300 to $1,200 (indicative) | About $200 to $600 (indicative) | About $500 to $1,800 (indicative) |
| Timber window | About $600 to $1,800 (indicative) | About $300 to $800 (indicative) | About $900 to $2,600 (indicative) |
| Louvre window | About $400 to $1,500 (indicative) | About $250 to $700 (indicative) | About $650 to $2,200 (indicative) |
| Double-glazed unit (extra to the above) | Often adds a premium over single glazing (indicative) | Similar labour, heavier glass (indicative) | Often a noticeable premium (indicative) |
| Glass-only replacement | About $150 to $600 (indicative) | About $100 to $300 (indicative) | About $250 to $900 (indicative) |
- Cost of aluminium windows (aluminium windows price): about $500 to $1,800 installed each, depending on size and glazing (indicative — get itemised quotes).
- Timber windows price list: expect more than aluminium, plus painting or staining, which adds time and cost (indicative — get itemised quotes).
- Cost of louvre windows: louvres cost more per square metre than a basic sliding window because of the extra blades and hardware (indicative).
House window replacement cost estimator Australia: cost by city
Sydney labour is typically the most expensive of the major capitals, and the handyman rates in this table are verified for Sydney and Melbourne only.
| City | Standard window installed | Handyman hourly rate |
|---|---|---|
| Sydney | About $500 to $2,500 (indicative) | $57 to $140, typically $105 |
| Melbourne | About $450 to $2,400 (indicative) | $52 to $125, typically $94 |
| Brisbane | About $450 to $2,300 (indicative) | Not verified for this guide (indicative — get itemised quotes) |
| Perth | About $450 to $2,400 (indicative) | Not verified for this guide (indicative — get itemised quotes) |
| Adelaide | About $400 to $2,200 (indicative) | Not verified for this guide (indicative — get itemised quotes) |
Window replacement cost calculator: what affects the price
- Choose the frame material first, because timber windows usually cost more than aluminium and need ongoing painting (indicative — get itemised quotes).
- Pick the glass carefully, since double glazing, laminated or toughened glass adds cost and can be required in some locations; check with the installer.
- Measure the size, as larger windows need heavier glass and sometimes extra people or equipment to install.
- Allow for removal of the old window and waste, which installers often include, but ask before you sign.
- Budget for making good the wall, plasterboard, render and paint around the frame after the old window comes out.
- Check the building age: homes built or renovated before 1990 may contain asbestos in fibro sheeting or putty, which must be identified first.
- Consider access, such as upper storeys and tight side passages, which add time and cost.
Window replacement cost estimator: a simple method
Use this method to build a rough budget before you ask for quotes. It takes about ten minutes.
- Count the windows you want to replace, and note each one’s type: sliding, awning, fixed, louvre or timber double-hung.
- Measure the width and height of each opening, and write the sizes down for the installer.
- Multiply the number of windows by the mid-point of the range above for each type (indicative — get itemised quotes).
- Add an allowance for making good and painting, which varies widely from room to room.
- Add a contingency for hidden problems such as rot, a failed lintel or asbestos found behind old sheeting.
- Check if the total passes $5,000, which triggers the NSW licensing rules for residential building work.
Window replacement: DIY vs hiring a pro
| Job | DIY | Hire a pro |
|---|---|---|
| Replace a flyscreen or fix a screen frame | Yes; see our flyscreen repair and replacement guide | Handy if the frame is bent or the screen is large |
| Reseal a leaking window | Often yes, with the right sealant; see the window seals guide | Worth it for upper storeys or if water has got into the wall |
| Replace a cracked pane | Only for small, accessible panes | Best for large, double-glazed or toughened glass |
| Replace a whole window frame | Not recommended, because it is building work | Use a licensed installer or builder for structural changes |
| Make good plasterboard, render and paint | Small patches only | Better for large areas, or for matching existing finishes |
| Anything involving asbestos sheeting | No | Identify it first and use a licensed professional if it is present |
How to save on window replacement cost without cutting corners
- Repair rather than replace when the frame is sound, because new seals, glass or hardware often cost far less than a whole window.
- Replace several windows in one job, since installers price travel and setup once, and bulk orders can lower the unit price.
- Compare aluminium with timber, as aluminium frames are usually cheaper and need less maintenance (indicative — get itemised quotes).
- Get three itemised quotes that list the window type, glass, installation and making-good lines separately.
- Bundle small jobs for a handyman on the same day, such as mounting a TV or replacing a toilet seat, because a full day can cost less than eight hourly-billed hours.
- Keep an eye on bigger projects: our kitchen renovation cost and carpet replacement cost guides show how to compare quotes in a similar way.
What a fair window replacement quote should include
- Itemised supply of each window, with the frame material, glass type, size and finish listed per window.
- Access and scaffold, if any, plus removal and disposal of the old windows and waste.
- Making good, including internal lining, external flashings or render, sealant and painting.
- A written contract: NSW small jobs under $20,000 use a small jobs contract, and the maximum deposit before work starts is 10%.
- The installer’s licence number, since residential building work above $5,000 must be done by someone licensed by Building Commission NSW.
- A written warranty on workmanship and a clear timeline from measure to installation.
Small window jobs a handyman costs in Sydney
Prices include GST and come from October 2026 Sydney data. A handyman handles small window repairs, not whole-window replacement.
| Job | Low | Typical | High |
|---|---|---|---|
| Window screen repair, Sydney (per job) | $69 | $115 | $205 |
| Weatherproofing or resealing, Sydney (per job) | $115 | $205 | $345 |
| Handyman hourly rate, Sydney | $57 | $105 | $140 |
| Call-out or minimum charge, Sydney | $92 | $140 | $170 |
| Minor plastering or patching, Sydney (per job) | $140 | $230 | $575 |
FAQ: house window replacement cost
How much are new windows?
A standard window typically costs about $500 to $2,500 installed in Sydney, depending on frame material, size and glass (indicative — get itemised quotes). Aluminium sits at the lower end, while timber and double-glazed units cost more. Always compare itemised quotes.
How much do aluminium windows cost?
Aluminium windows usually cost about $500 to $1,800 each installed, depending on size, style and glazing (indicative — get itemised quotes). Louvre and double-glazed options push the price up. Check what is included, such as removal, making good and painting.
How much does window glass replacement cost?
Glass-only replacement often costs about $250 to $900 per pane, depending on size and glass type (indicative — get itemised quotes). Toughened, laminated and double-glazed panes cost more. A glazier or window installer should measure the pane before quoting.
Do I need a licence to replace windows in NSW?
Residential building work valued at more than $5,000 must be done by someone licensed by Building Commission NSW. Smaller jobs may not need a licence, but structural changes, lintel work or asbestos do. Check with the installer and your council.
Can a handyman replace a window?
A handyman can repair seals, replace flyscreens and fix small panes or hardware. Whole-window replacement is building work, so use a licensed installer or builder, and book a handyman afterwards for patching or touch-ups.
Getting window repairs done in Sydney
If you only need seals, screens, hardware or patching after a window job, we can fix them in one visit and tell you early if a window needs a licensed installer. Book a handyman in Sydney and add any other small jobs, such as bathroom epoxy grout repairs, to the same visit.


