How to build a fence comes down to a string line, a post hole digger or auger, a level and a plan: set the posts first, fix the rails between them, then fit the palings or panels. The biggest thing that goes wrong is a wobbly line caused by posts that are not plumb or not set to a string, because every later step copies that mistake.
This guide covers when a DIY fence is realistic, the steps for a paling fence, low-cost designs, and what a Sydney handyman charges. If you are also planning a deck, our how to build a deck guide uses the same planning checks.
Key points
- It is a nine-step job that suits a patient DIYer over a weekend or two, with the post setting and curing deciding how long it really takes.
- The one tool you cannot skip is a long spirit level used with a tight string line, because posts must be plumb and in line before concrete sets.
- Safety check: use Before You Dig Australia before digging, wear eye, ear and dust protection, and treat any old fibro sheeting as asbestos until proven otherwise.
- A Sydney handyman typically charges $105 an hour (range $57–$140) or $690 for a full day (range $435–$1025), with a $140 minimum call-out (range $92–$170).
Can you build a fence yourself? DIY fence rules in NSW
Often yes for a low back-yard fence, but boundaries, neighbours and licensing set the limits.
| Situation | DIY OK? | Why |
|---|---|---|
| Short timber paling fence inside your own block | Yes | The method is simple, and a patient DIYer can handle the digging, levelling and fixing with a second person. |
| Dividing fence on a boundary with a neighbour | Talk first | NSW has rules about sharing costs and giving notice under the Dividing Fences Act, so speak to your neighbour and check the Fair Trading guidance. |
| Long or high fence where the total job value passes $5,000 | Licence needed | In NSW, residential building work valued at more than $5,000 must be done by someone licensed by Building Commission NSW. |
| Pool fence or barrier | No | Pool barriers have strict rules, so use a qualified person and your council or certifier. |
| Colorbond or steel fencing | Book a licensed pro | For Colorbond fencing, book a licensed construction team rather than DIY from a how-to. |
| Pre-1990 home with an old fibro fence or sheeting | Pause first | Homes and structures built or renovated before 1990 are likely to contain asbestos, so do not cut or drill and check asbestos.nsw.gov.au. |
Tools and materials for a DIY fence
Hire the heavy digging gear from Bunnings or a local hire shop if you do not own it.
| Item | What it is for | Tip |
|---|---|---|
| Post hole digger or powered auger | Digs clean holes for the posts. | Use Before You Dig Australia first, as a hit service line is dangerous and costly. |
| String line, stakes and long spirit level | Sets the straight line and keeps posts plumb. | Re-check plumb on two faces of every post before the mix sets. |
| Treated timber posts, rails and palings | Form the structure and the face of a paling fence. | Check the treatment tag suits in-ground use, and follow the supplier’s span chart. |
| Post-set or concrete mix | Locks the posts in the ground. | Follow the packet for mixing and setting, as cure and loading times vary by product. |
| Circular saw, drill driver and galvanised fixings | Cuts timber and fixes rails and palings. | Ryobi and Makita both make suitable tools; use fixings rated for treated timber. |
| Gloves, eye and ear protection, dust mask | Protects you from timber dust, noise and chemicals. | Treated pine dust is an irritant, so cut outdoors and sweep up after. |
How to build a fence: step by step
- Confirm your boundary from the survey pegs or a survey, speak to the neighbour, and check council rules, since fences are exempt only within set limits.
- Use Before You Dig Australia, then pull a tight string line between end stakes along the fence line so every post can be set to the same straight edge.
- Mark post positions along the line using the supplier’s span chart or the manufacturer’s instructions, adding stronger posts at corners, ends and gate openings.
- Dig the post holes to the depth your supplier or an engineer specifies, keeping them straight sided and deeper where the ground is soft or sloping.
- Set the end posts first, check plumb on two faces with a level, brace them with timber offcuts, and fill with post-set or concrete per the packet.
- Pull a fresh string line between the end posts, then set the in-between posts to that line and height, and let the mix cure for the packet’s stated time.
- Fix the rails between the posts with galvanised fixings, using a level on each rail so the line stays straight and the palings hang cleanly.
- Fix the palings from one end, using a spacer for equal gaps, two fixings per rail and a level every few boards to avoid a creeping lean.
- Trim tops to a string line if needed, fit the cap rail and gate hardware, check ground clearance, and apply a finish following the product label.
How to build a paling fence
A timber paling fence is the usual DIY fence in Sydney back yards because the materials are easy to find and cut.
- Use treated pine posts and rails and palings sized to the supplier’s span chart, because spacing and thickness are not something to guess.
- Fix rails on the side that suits the owner and neighbour agreement, and check who sees the good face before you start.
- Use a spacer for even gaps between palings, and keep checking plumb because a small error grows across a long run.
- Seal cut ends and drilled edges with the product the label recommends, since end grain takes in water first.
- Allow ground clearance so palings do not sit in damp soil, a common cause of early rot in older Inner West yards.
DIY fence kits vs building from scratch
A DIY fence kit saves on planning, while a custom build gives more control over height, style and cost.
| Option | Best for | Watch out for |
|---|---|---|
| DIY fence kits (panels and posts) | Straight, flat runs where speed matters. | Panels have fixed sizes, so odd lengths and slopes need extra cutting. |
| Paling fence from scratch | Sloping or irregular boundaries and custom heights. | More cutting and levelling, and mistakes compound across the run. |
| Pre-assembled timber panels | Quick installs with a second person. | Posts must be set accurately first, or the panels will not sit. |
| Colorbond or steel | Low maintenance boundaries. | Book a licensed construction team, because this is their trade. |
| Repair existing sections | Fences that are mostly sound. | See fence and gate repair before you rebuild a whole line. |
Modern low cost fence designs
You can keep the cost down without making the fence look temporary.
- Use a simple horizontal slat design with fewer cuts, but check the supplier’s rail and post spacing for the board you choose.
- Choose standard paling lengths from Bunnings and design around them, so you cut less and waste less timber.
- Mix a lower fence at the front with taller palings at the rear boundary, where privacy matters most.
- Pair a simple fence with a garden strip, and see how to build a raised garden bed for planting along it.
- Edge the base with pavers or a mow strip using how to lay pavers, which keeps soil off the palings.
How to build a fence on a sloping block
Sloping Sydney lots make the job harder, because posts follow the ground but palings must still look level.
- Choose between stepped sections and a racked fence that follows the slope, and decide before you set the first post.
- Set posts to plumb on the high side and string each step level, so every panel or paling run is aligned.
- Check whether a retaining wall is needed; exempt retaining walls must be no higher than 600 mm and at least 900 mm from lot boundaries, so read how to build a retaining wall.
- Use stronger posts at the base of steep runs and corners, and confirm sizes with the supplier or an engineer.
- Ask council about height rules for fences near driveways, corners and retaining walls before you buy materials.
Common mistakes when you build a fence
- Starting without a surveyed boundary or a chat with the neighbour, then discovering a dispute after the posts are set.
- Skipping Before You Dig Australia and hitting a cable, gas or water line with the auger.
- Setting posts without a string line or level, so the whole run drifts and palings never look straight.
- Loading rails and palings before the post mix has cured for the packet’s stated time.
- Using the wrong fixings or untreated timber in the ground, which rots or stains quickly.
- Cutting or drilling old fibro in a pre-1990 home without checking for asbestos, or lifting heavy panels without a second person.
When to call a handyman (or a licensed trade)
- The job is large enough that labour and materials may pass $5,000, because a licensed builder is required for residential building work over that value.
- Work over $20,000 needs a full contract and Home Building Compensation cover, and the maximum deposit before work starts is 10%.
- You want Colorbond or steel fencing, which belongs to a licensed construction team.
- The fence includes a retaining wall, pool barrier or an unusually steep slope, where engineering and approvals matter.
- You hit pipes or cables while digging, so stop and book a licensed plumber or electrician rather than repairing them yourself.
- You have gates or gaps that need adjustment later, which is a quick handyman job; see concrete driveway cost if the fence runs beside a new slab.
Cost to hire a handyman to build a fence in Sydney
Prices include GST and come from October 2026 Sydney handyman data.
| Job | Low | Typical | High |
|---|---|---|---|
| Handyman hourly rate, Sydney | $57 | $105 | $140 |
| Call-out or minimum charge, Sydney | $92 | $140 | $170 |
| Half-day handyman, Sydney (4 hours) | $230 | $415 | $645 |
| Full-day handyman, Sydney (8 hours) | $435 | $690 | $1025 |
- Total fence prices depend on length, height, access and materials (indicative — get itemised quotes), so ask for line items.
- A full day can cost less than eight hourly-billed hours, so long runs often suit a day booking.
- For work under $20,000, a small jobs contract applies, and the maximum deposit is 10%.
FAQ: how to build a fence
How to build a fence?
Mark the line with a string, dig post holes, set the end posts plumb in concrete, then set the in-between posts to the line. Fix rails once the mix has cured, then fit palings or panels. Check boundaries, neighbours and any council rules before you start.
How to build a paling fence?
Set treated posts to a string line, fix rails between them, then fix palings from one end with a spacer for even gaps. Check plumb often, follow the supplier’s span chart, and use fixings rated for treated timber. A second person helps with long lengths.
Is a DIY fence worth it?
A DIY fence can save labour on a low, straight back-yard fence if you have time and a second person. It is less worthwhile for long runs, slopes, boundary disputes or anything near the $5,000 licensing limit, where a licensed builder is safer.
Do DIY fence kits save money?
Kits save time on straight, flat runs because the panels and posts are designed to fit. They can cost more when you need odd lengths or custom heights. Compare a kit with a basic paling build using itemised quotes before you buy.
Getting a fence built properly in Sydney
If you would rather not dig and level for a weekend, we can build a timber fence, fit gates and repair sections, and flag anything that needs a licensed builder. Book a Sydney handyman for your fence, and compare costs in retaining wall cost if the slope needs support.


