Laminate Flooring Cost in Sydney (2026 Guide)

Laminate flooring cost in Sydney is commonly quoted per square metre, with installed prices of roughly $40–$105 per m² for laminate and $70–$180 per m² for hybrid (indicative — get itemised quotes). The biggest drivers are the product grade, the state of the subfloor and whether the installer must remove old flooring first.

Key points

  • Laminate usually costs less than hybrid, but hybrid is more water-resistant, so the cheaper option is not always the better value in kitchens and laundries.
  • The biggest cost drivers are the product grade, subfloor preparation, old flooring removal and the layout of the room.
  • The cheapest route is a straightforward laminate click floor over a flat, dry subfloor with no furniture shifting or demolition.
  • DIY is realistic for a simple rectangular room, but a Sydney handyman typically charges $105 an hour (range $57–$140) for labour.

Laminate flooring cost: price table

These figures are broad ranges for supply and installation, and they depend heavily on brand and range.

Floor typeMaterials per m²Labour per m²Installed total per m²
Entry-level laminate$20–$40 (indicative)$20–$35 (indicative)$40–$75 (indicative)
Mid-range timber laminate flooring$35–$65 (indicative)$25–$40 (indicative)$60–$105 (indicative)
Standard hybrid timber flooring$45–$90 (indicative)$25–$45 (indicative)$70–$135 (indicative)
Premium hybrid flooring$80–$130 (indicative)$30–$50 (indicative)$110–$180 (indicative)
Brand ranges such as Godfrey Hirst hybrid flooringVaries by collection (get itemised quotes)Varies by installerCheck current retailer prices

Treat the table as a guide only, and ask three suppliers for current floor price lists.

Laminate flooring cost by city

Labour is the part of the price that changes most from one city to the next.

CityHandyman hourly rateCall-out or minimumNote
Sydney$57–$140 (typical $105)$92–$170 (typical $140)Verified October 2026, including GST.
Melbourne$52–$125 (typical $94)$84–$160 (typical $125)Verified October 2026, including GST.
BrisbaneNo verified figureNo verified figureExpect similar per m² ranges (indicative — get itemised quotes).
PerthNo verified figureNo verified figureFreight and supplier range can shift prices (indicative — get itemised quotes).
AdelaideNo verified figureNo verified figureExpect similar per m² ranges (indicative — get itemised quotes).

What affects laminate flooring cost

  • Product grade and thickness: thicker, higher-wear laminate and rigid-core hybrid planks cost more per square metre than basic click laminate.
  • Subfloor condition: an uneven concrete slab may need grinding or self-levelling floor compound before any plank goes down.
  • Removal of old flooring: lifting carpet, tiles or timber adds labour, and pre-1990 vinyl or sheet may contain asbestos.
  • Room layout: cutting around doorways, stairs, fireplaces and curves creates more waste and slows the installer.
  • Moisture and wet areas: bathrooms and laundries favour water-resistant hybrid planks, and floating floors need a flat, dry base.
  • Extras: underlay, skirting boards, scotia, door trimming and transition strips are often priced separately.
  • Access and furniture: stairs, apartment lifts, and moving furniture can add time and cost.

Laminate vs hybrid flooring: price difference

Hybrid generally costs more per square metre, so the price difference between laminate and hybrid flooring is mostly the rigid core and water resistance.

QuestionLaminateHybrid
Price on laminate flooring vs hybrid flooringLower (indicative — get itemised quotes)Higher (indicative — get itemised quotes)
Water resistanceModerate; swells if water sits on itBetter; check the maker’s rating
How much is hybrid flooring per square metre?Not applicableSee the price table above (indicative)
Floating timber floors costOften lower for laminateOften higher for hybrid
Best roomsBedrooms, living areas and dry roomsKitchens, laundries and busy family areas
Cost to lay hybrid flooringNot applicableSimilar labour to laminate (indicative — get itemised quotes)

Floating floorboards in laminate and hybrid flooring

Floating floorboards are planks that click or lock together and sit on an underlay without being glued or nailed to the subfloor.

  • They are held in place by their own weight and the click joints, so the floor can expand and contract as a single piece.
  • They need an expansion gap around the edges, which skirting boards or scotia cover; follow the maker’s instructions for the width.
  • They suit concrete slabs and timber subfloors that are flat, clean and dry, but not subfloors with moisture problems.
  • They are easier for DIY than glued or nailed floors, and they can usually be lifted and replaced later.
  • They can feel hollow underfoot if the underlay is poor, so choose an underlay the maker recommends.
  • They are not a good idea over an uneven or soft base, because the click joints will flex and fail.

How to lay floating floorboards for laminate flooring

  1. Check the subfloor is clean, flat and dry, and check the maker’s instructions for acceptable moisture and flatness before you start.
  2. Acclimatise the planks in the room as the maker advises, and plan the layout so the last row is not too narrow.
  3. Lay the underlay across the floor with the joins taped or butted as instructed, and keep it flat without bubbles or folds.
  4. Start along the longest straight wall, leaving the expansion gap at the edge, and click the first row together.
  5. Stagger the end joints from row to row so the floor looks natural and the joints lock together properly.
  6. Cut planks with a fine-toothed saw, undercutting door jambs so the planks slide underneath instead of leaving a gap.
  7. Fit the final row, trim as needed, and install skirting or scotia and transition strips to cover the expansion gap.
  8. Leave the floor to settle as the packet suggests before moving furniture back, and use felt pads to protect the surface.

How to install hybrid flooring

The method is close to laminate, with a few differences because hybrid planks are rigid and more water-resistant.

  • Follow the maker’s instructions exactly, because hybrid products differ in click systems, underlay requirements and subfloor limits.
  • Check the slab for moisture and the subfloor for flatness, since a rigid core can telegraph bumps and rock on high spots.
  • Use the attached underlay or a recommended one, and avoid adding extra underlay under planks that already have it.
  • Keep the expansion gap around the edges and under fixed items, such as cabinets, so the floor can move.
  • Cut planks with a fine-toothed saw or a utility knife for score-and-snap types, as the maker’s instructions allow.
  • Read the timber flooring cost guide if you are weighing hybrid against real timber.

DIY vs hiring a pro for laminate flooring

FactorDIYHire a pro
Simple rectangular room, flat dry subfloorRealistic, with patience and a few toolsFaster and usually neater at the edges
DIY vinyl flooring (click planks)Possible if the subfloor is flat and cleanBetter for glue-down vinyl and wet areas
Uneven slab or moisture issueNot advisedA flooring installer should fix the base first
Pre-1990 vinyl or sheet to be liftedNo, treat as suspect asbestosCheck asbestos.nsw.gov.au and use a licensed asbestos professional
Cutting doorways, stairs and curvesSlow and wasteful if you are newCleaner finish and less waste
Labour costYour time, plus tool hireHourly or per m² (indicative — get itemised quotes)

How to save on laminate flooring cost without cutting corners

  1. Compare three itemised quotes that separate materials, underlay, labour, removal and trims, so you can see where the money goes.
  2. Choose a mid-range product with a good wear rating instead of the cheapest board, and check the packet for the warranty terms.
  3. Prepare the room yourself by clearing furniture and removing skirting where the installer agrees, which reduces labour time.
  4. Match the product to the room, using hybrid only in wet or high-traffic areas and laminate elsewhere.
  5. Book a half-day or full-day handyman for trims, doors and finishing; a full day can cost less than eight hours billed hourly.
  6. Order a small allowance for waste and offcuts instead of over-ordering, but keep a spare box for future repairs.

What a fair flooring quote should include

  • Itemised materials with brand, range, thickness, wear rating and the area covered in square metres.
  • Underlay type, skirting, scotia and transition strips, with a clear line for door trimming.
  • Removal and disposal of old flooring, and a plan for any asbestos-suspect material in homes built before 1990.
  • Subfloor preparation, including levelling, moisture testing and fixing loose boards or cracks.
  • Access, furniture moving and waste removal, so nothing is added later.
  • Licence number where a licence applies, a written contract, a maximum 10% deposit and warranty terms in writing.

FAQ: laminate flooring cost

How to install hybrid flooring?

Check the slab or subfloor is flat and dry, lay the recommended underlay, then click the planks together row by row, leaving an expansion gap at the edges. Stagger the end joints, cut around door jambs and fit skirting or scotia. Follow the maker’s instructions exactly.

What are floating floorboards?

Floating floorboards are planks that click together and rest on an underlay instead of being glued or nailed to the subfloor. The floor moves as one piece, so it needs an expansion gap at the edges. Laminate and most hybrid flooring are installed this way.

How much is hybrid flooring per square metre?

Installed hybrid flooring in Australia is roughly $70–$180 per m², depending on brand, thickness and labour (indicative — get itemised quotes). Prices vary by retailer and range, so check current prices for your chosen product before you budget.

How much is laminate flooring?

Installed laminate flooring is roughly $40–$105 per m², depending on grade, subfloor and room layout (indicative — get itemised quotes). Handyman labour in Sydney typically costs $105 an hour (range $57–$140), with a minimum call-out of about $140.

Getting laminate or hybrid flooring sorted in Sydney

If you would rather not cut around every doorway yourself, we can prepare the room, fit trims and doors and handle the finishing around a floor, and point you to a flooring installer for large areas. Book a Sydney handyman for flooring prep and finishing, and compare options in our carpet replacement cost, floor sanding cost, epoxy flooring cost and polished concrete floors cost guides. Where tiles meet the new floor, epoxy grout keeps edges neat.