What Is Leveling Concrete Floor? Meaning & Uses

Self levelling floor compound is a cement-based liquid you pour onto a rough slab so it flows flat, giving new flooring a smooth base. Leveling concrete floor surfaces this way means priming, mixing to the bag’s instructions, pouring in one continuous run and letting the compound settle itself.

How leveling concrete floor compound works

The compound is thin enough to flow into low spots and find its own level, then it hardens into a firm layer.

  • Clean and prime the slab first, because dust, oil and old adhesive stop the compound bonding and cause it to lift later.
  • Mix the powder with clean water to the ratio printed on the bag, as too much water weakens the finished surface.
  • Pour in one continuous run and spread with a gauge rake or trowel, so joins between batches do not show.
  • Seal gaps, drains and doorways before you pour, because the liquid runs into any opening it finds.
  • Leave it undisturbed for the time the maker states, then check the hardness and moisture before laying flooring on top.

Where self levelling compound is used on a concrete floor

In older Sydney terraces and units, slabs often dip near walls or carry ridges where past flooring was removed.

  • Under new carpet, timber or hybrid planks, where a flat base stops boards flexing and clicking underfoot.
  • Under vinyl and tiles, where small bumps telegraph through the finish and crack or wear the surface early.
  • Over a patched slab after a plumber or builder has cut and refilled a trench, so the repair is invisible.
  • Behind a new kitchen or wardrobe, where the unit needs a level footing to hang doors and drawers straight.
  • Before epoxy or polished-style coatings, only if the compound maker approves it as a base for that coating.

Leveling concrete floor: sizes, ratings and specs

The numbers that matter, such as coverage, depth and wait times, differ by brand, so read the bag. We have not listed figures here because none are verified for every product.

Spec to checkWhat it tells youWhere to find it
Minimum and maximum depthHow thin or thick you can pour in one layerProduct data sheet from Ardex, Mapei or Sika
Coverage per bagHow many bags your floor area needsBag label, then add extra for waste
Primer typeWhich primer suits your slab and flooringMaker’s instructions, never a guess
Walk-on and cover timesWhen you can step on it or lay flooringData sheet, and allow longer in cool weather
Moisture limitWhether the slab is dry enough for your flooringFlooring maker’s instructions and a moisture test
  • Homes built or renovated before 1990 may have asbestos in old vinyl, tiles or adhesives, so identify suspect material at asbestos.nsw.gov.au before you grind, sand or lift anything.
  • Deep cracks, sloping slabs or damp coming up through the concrete are a builder’s call, not a job for another layer of compound.
  • Screed: a thicker layer of sand and cement, laid by a tradie, that builds up or slopes a slab before finishes go on.
  • Primer: a thin coat that seals the slab and helps the compound grip, as in our epoxy flooring cost guide.
  • Substrate: the surface under your finish, such as the slab or old floor, covered in our carpet replacement cost guide.
  • Expansion joint: a deliberate gap in a slab that must stay open, so never fill it with compound.

FAQ: leveling concrete floor with compound

Can I do leveling concrete floor jobs myself?

Small rooms and shallow low spots are a realistic DIY job if you prep carefully and pour in one run. Large areas, deep dips or damp slabs are better quoted by a tradie, because a half-set pour is very hard to fix.

What is concrete floor leveling compound made of?

It is mostly cement, fine sand and polymer additives that help it flow and bond. Different brands suit different thicknesses and coverings, so use the compound and primer sold together, and follow the manufacturer’s instructions on the bag.

Is self levelling compound the same as screed?

No. Screed is a thicker, stiffer mix that a tradie trowels to shape, while self levelling compound is a thin pourable mix for smoothing. Many floors need screed for big falls and compound for a final smooth finish.

For the bigger flooring picture, start with our carpet replacement cost guide, or book a handyman in Sydney to assess your slab.