Timber flooring cost in Sydney typically runs from about $60 to $250 per square metre installed, depending on the species and board type (indicative — get itemised quotes). Species, board thickness, subfloor condition and removal of the old floor drive most of the price, and the pre-1990 asbestos check can add to it.
This guide covers timber flooring cost per square metre for solid, engineered and hybrid-style boards, what pushes the price up, how to lay timber flooring yourself, and what a handyman or flooring trade charges.
Key points
- Expect roughly $60 to $250 per square metre installed, with solid hardwoods such as spotted gum at the top and engineered or floating boards lower (indicative — get itemised quotes).
- The biggest cost drivers are the board species, the floor preparation underneath, and whether the old flooring has to be lifted and removed.
- The cheapest route is a floating engineered or laminate-look floor laid over a flat, dry subfloor, which many confident DIYers can handle.
- A Sydney handyman charges about $105 an hour, with a typical call-out of $140 (October 2026), but a full nail-down solid floor belongs with a flooring specialist.
Timber flooring cost: price table by board type
These figures cover typical Sydney jobs for a standard living area. Prices vary with supplier, finish and access, so use them to compare quotes rather than to set a budget.
| Board type | Materials per m² | Labour per m² | Installed total per m² |
|---|---|---|---|
| Solid timber flooring price (hardwood) | About $50 to $140 (indicative) | About $40 to $100 (indicative) | About $90 to $250 (indicative) |
| Spotted gum flooring price | About $70 to $140 (indicative) | About $45 to $100 (indicative) | About $115 to $240 (indicative) |
| Engineered timber flooring | About $40 to $120 (indicative) | About $25 to $70 (indicative) | About $65 to $190 (indicative) |
| Floating timber-look or hybrid boards | About $25 to $70 (indicative) | About $20 to $45 (indicative) | About $45 to $115 (indicative) |
| Sanding and coating an existing floor | Coating products only (indicative) | About $30 to $60 (indicative) | About $30 to $70 (indicative) |
- How much is timber flooring per square metre? Most Sydney homes land between about $60 and $250 installed (indicative — get itemised quotes).
- Spotted gum flooring cost sits at the upper end of this range because it is a dense, popular Australian hardwood.
- Quotes quoted per square metre rarely include skirting, door trims, stair nosings or furniture moving, so ask what is in the price.
Timber flooring cost by city
Sydney labour is usually the most expensive of the major capitals, and the handyman rates below are verified for Sydney and Melbourne only.
| City | Installed timber flooring per m² | Handyman hourly rate |
|---|---|---|
| Sydney | About $60 to $250 (indicative) | $57 to $140, typically $105 |
| Melbourne | About $55 to $240 (indicative) | $52 to $125, typically $94 |
| Brisbane | About $55 to $230 (indicative) | Not verified for this guide (indicative — get itemised quotes) |
| Perth | About $55 to $235 (indicative) | Not verified for this guide (indicative — get itemised quotes) |
| Adelaide | About $50 to $225 (indicative) | Not verified for this guide (indicative — get itemised quotes) |
What affects timber flooring cost
- Choose the species carefully, because hardwoods like spotted gum and blackbutt cost far more per square metre than pine or engineered boards (indicative — get itemised quotes).
- Allow for removal of old carpet, tiles or vinyl, which can add a few dollars per square metre and more if glue or screed has to go (indicative).
- Expect subfloor repairs, such as levelling or replacing damaged boards, to raise the labour bill; our self-levelling floor compound guide explains one common fix.
- Budget extra for sanding and coating a nail-down solid floor, which adds a second stage of work; see the floor sanding cost guide for the price of that step.
- Add skirting, stair nosings and door trims, which are priced per lineal metre and can surprise you on the final invoice (indicative).
- Treat homes built or renovated before 1990 with caution, because old vinyl, adhesive and underlay may contain asbestos and must be identified before lifting.
- Factor in access, such as stairs, apartment lifts and parking, which add time for carrying boards and taking out waste.
How to install timber flooring: DIY or hire a pro?
| Option | DIY | Hire a pro |
|---|---|---|
| Floating engineered or hybrid boards | Suits confident DIYers on a flat, dry slab or sheet floor | Worth it for awkward rooms, doorways and stair landings |
| Solid nail-down or glue-down timber | Not recommended, because the tools and finishing skills are specialist | Best choice for a flat, long-lasting result |
| Old floor removal | Possible after an asbestos check on pre-1990 homes | Worth it for glued floors, screed and large areas |
| Subfloor levelling | Small dips only, following the compound’s instructions | Better for large or sloping floors |
| Skirting and trims | Suits a handyman or competent DIYer with a mitre saw | Often priced into the flooring quote |
- Check the floor first for moisture, level and flatness, and stop if the slab is damp or the subfloor is soft.
- Remove old flooring, skirting and trims after confirming that nothing suspect is present in a pre-1990 home.
- Let the boards acclimatise in the room for the time the maker states, usually in their sealed packs.
- Lay the underlay and plan the first row so the last row isn’t a thin sliver at the wall.
- Click or fix each row to the maker’s instructions, leaving the expansion gap at every wall.
- Cut around doorways and pipes, refit the skirting, and finish with trims and thresholds.
Laying timber flooring is a good fit for DIY only with floating boards; the same method for solid timber needs trade skills.
How to save on timber flooring cost without cutting corners
- Compare engineered boards with solid timber, because a good engineered floor can look similar at a lower installed price (indicative — get itemised quotes).
- Pull up old carpet and underlay yourself if the house is post-1990 and the glue and tack strips are not suspect, then leave the floor prep to the installer.
- Order slightly more boards than the room needs for cuts and waste, but not so much that leftovers sit in the garage unused.
- Get three itemised quotes so you can compare materials, labour, removal, trims and sanding or coating line by line.
- Book a handyman for skirting and small finishing jobs; a full day can cost less than eight hourly-billed hours (October 2026).
- Check the laminate vs hybrid flooring guide if the budget is tight, since these floors cost less and install faster.
What a fair timber flooring quote should include
- Itemised materials, with the species, board width, grade and finish, and the allowance for waste.
- Labour for preparation, removal of the old flooring and rubbish, and any subfloor repair.
- Trim work: skirting, scotia, door strips and stair nosings, with each item listed.
- Sanding and coating, if the floor is raw timber, with the number of coats and the product named.
- A written contract, because NSW residential building work above $5,000 needs a licensed builder, and jobs under $20,000 use a small jobs contract.
- Licence number, insurance, deposit limit (maximum 10% before work starts in NSW) and the warranty in writing.
FAQ: timber flooring cost
How to install timber flooring?
Check the subfloor is dry, flat and clean, then let the boards acclimatise. Lay underlay, plan the first row, then fix or click each row with an expansion gap at every wall. Solid timber needs nailing or gluing and finishing, so hire a flooring specialist for those.
How much is timber flooring?
Most Sydney homes pay roughly $60 to $250 per square metre installed, depending on species and board type (indicative — get itemised quotes). Engineered and floating boards sit at the lower end, while solid hardwoods such as spotted gum cost more.
How much is timber flooring per square metre?
Expect about $60 to $250 per square metre installed in Sydney (indicative — get itemised quotes). Materials usually make up about half, with the rest in labour, removal and finishing. Always ask whether trims, sanding and coating are in the quoted price.
What is the cheapest timber flooring to install?
A floating engineered or hybrid floor over a flat, dry subfloor is usually cheapest, because it has lower material costs and quicker installation than solid timber. Check the maker’s instructions for subfloor limits, and read our epoxy flooring cost guide or polished concrete floors cost guide for other budget options.
Getting timber flooring installed in Sydney
If you’d like a hand with the preparation, trims or a small floating floor, we can organise it with an itemised quote and a clear scope. Book a handyman in Sydney for skirting, thresholds and small repairs, and compare our price with your carpet replacement cost before you commit to timber. If grout lines in a wet area need work, see our epoxy grout guide for what to ask for.


