Curtain installation means fixing a rod or track to studs, masonry or the ceiling, then hanging the curtains level and clear of the floor. In Sydney, a handyman typically charges about $105 an hour for curtain installation (range $57–$140, October 2026), so most jobs cost less than a made-to-measure curtain.
This guide covers curtain installation step by step, sheer curtain installation, what affects the price, and when to book help. For the hardware side, see our curtain rod installation guide.
Key points
- Curtain installation is an eight-step job for most rooms, and the hard part is a level, secure fixing rather than hanging the fabric.
- Stud finder and cable detector first: wiring often runs above windows from nearby switches, and a drill through it is dangerous.
- Use a second person for anything above shoulder height, such as long tracks, bay windows and high ceilings.
- A Sydney handyman typically charges a $140 minimum for a visit (range $92–$170), so book all your curtain installation in one go.
Can you do curtain installation yourself?
A single rod on a standard window is a manageable DIY job, but long tracks and heavy drapes are harder.
| Your situation | DIY OK? | Why |
|---|---|---|
| Single rod on a timber frame or stud | Yes | Brackets screwed into solid timber hold well; pilot-drill to stop splitting and follow the rod’s instructions. |
| Rod on plasterboard with no stud | Light curtains only | Use anchors rated above the curtain weight, and check the packet rather than guessing. |
| Heavy lined curtains or wide windows | Two people | Weight and length pull on the brackets, so fix into studs or masonry and use a centre support. |
| Ceiling-mounted track | Experienced DIYers | You need to find joists and work overhead, so use a second person and a stable ladder. |
| Brick, concrete or tiled reveals | Check first | Masonry needs a hammer drill and tiles crack easily, so take care or book a handyman. |
| Electric curtain motor on mains power | No | New or moved power points are electrical work and need a licensed electrician in NSW. |
| Renting | Ask first | NSW lets tenants request internal curtains, but you still need consent before drilling. |
Tools and materials for curtain installation
| Item | What it’s for | Tip |
|---|---|---|
| Rod, track or sheer curtain rail | Carries the curtains | Check its weight and span against the maker’s instructions before you buy. |
| Brackets and screws | Fix the rod to the wall | Use fixings matched to the wall, not just the screws in the box. |
| Stud finder with cable detection | Finds framing, cables and pipes | Scan above and beside the window twice and mark every hit in pencil. |
| Spirit level and tape measure | Set height and keep the rod straight | A long level beats the bubble in a bracket, and always measure from the floor. |
| Drill and bits | Pilot holes | Match the bit to timber, masonry or metal, and drill slowly. |
| Stepladder | Reaches the top of the window | Use a stable ladder and a second person for anything overhead. |
Curtain installation: step by step
Allow time to hang and adjust the fabric once the rod is up, as small changes make a big difference to how the curtains look.
- Decide the rod height and width, usually higher and wider than the window so the curtains clear the glass and let in light when open.
- Scan for studs, cables and pipes above the window, and avoid lines running vertically and horizontally from nearby switches.
- Mark the bracket positions with a pencil and level, and add a centre bracket for a long span or heavy curtains.
- Drill pilot holes, using the right bit for timber, masonry or metal, and clear the dust from masonry holes.
- Fix the brackets with suitable screws or anchors, recheck for level, and stop tightening when snug so you don’t crush plasterboard.
- Thread the curtains onto the rod or track, fit the finials, and lift the rod onto the brackets with a helper.
- Adjust the height so the hem clears the floor, and check that the curtains slide without catching on the brackets.
- Dress the folds by hand and let them hang for a day, then make small adjustments to the hooks or rings.
Sheer curtain installation
Sheer curtains are light, but their double tracks and long drops need accurate fixing to look right.
- Choose a double rod or double track so sheers hang behind the main curtains and can be opened or closed independently.
- Check the clearance between the two rods so heavier curtains don’t drag on the sheers when drawn.
- Fix a sheer rail lighter than a drape rail if you only have plasterboard, and still check the packet rating for the anchors.
- Hang sheers to the same height as the curtains so the hems line up and the window looks tidy.
- Wash and iron sheers before hanging, because creases fall out less readily once the fabric is on the rod.
- Leave the sheers a little full, as gathered fabric hides the weight of the heading and looks more expensive.
Curtain installation on different walls and ceilings
The surface behind the bracket decides the fixing, so check it before you buy hardware.
- On plasterboard, find at least two studs, or use hollow-wall anchors only where the packet rating clearly covers the load.
- On brick or concrete, use a hammer drill, a masonry bit and the anchors supplied for masonry, and keep the drill square.
- On a ceiling, fix the track into joists where possible and avoid the lines of recessed lights and cables.
- On metal frames, use screws made for thin metal or choose a tension rod within the maker’s size limits.
- On fibro or old sheeting in a pre-1990 home, treat the material as asbestos until it’s checked, and don’t drill it.
- In rentals and strata units, ask first; NSW lets tenants request internal curtains and removable blinds but consent is needed.
Curtain installation cost: what affects the price
- Number of windows: the first window carries the minimum charge, and extra windows in one visit are cheaper per window.
- Height and access: tall windows, stairwells and bay windows need ladders and a second person.
- Wall type: masonry, tiles and steel frames take longer than timber or plasterboard.
- Rod or track type: ceiling tracks and long spans take longer than a simple rod.
- Curtain fabric and weight: heavier curtains need stronger fixings and often a centre bracket.
- Removal and patching: taking down old curtains and filling screw holes adds time.
Common mistakes with curtain installation
- Fixing brackets into plasterboard only, then finding them pulled loose once heavy curtains are hung.
- Mounting the rod too low or too narrow, which blocks light and makes the window look smaller.
- Skipping the cable scan, then drilling above a window where a power cable runs to a switch.
- Hanging curtains that touch the floor, which collects dust and drags on carpet.
- Drilling into old fibro or sheeting in a pre-1990 home without checking for asbestos.
- Working overhead alone on a ladder, which risks a fall and a damaged track.
When to call a handyman for curtain installation (or a licensed trade)
- You have several windows, bay windows or long ceiling tracks that need a ladder and a second person.
- The wall is tiled, rendered, fibro or part of a pre-1990 home where hidden asbestos is a risk.
- You want electric curtains powered from the mains, which needs a licensed electrician such as TQN Electrician.
- You need old curtains and rods removed and screw holes patched before the new set goes up.
- You’re renting and want the job done neatly so holes can be patched cleanly at the end of the lease.
- You want blinds as well as curtains; read our blinds cost guide for how that job is priced.
Cost to hire a handyman for curtain installation in Sydney
Prices below include GST and come from October 2026 Sydney and Melbourne metro data. Curtain supply is separate and varies widely (indicative — get itemised quotes).
| Job | Low | Typical | High |
|---|---|---|---|
| Handyman hourly rate, Sydney | $57 | $105 | $140 |
| Call-out or minimum charge, Sydney | $92 | $140 | $170 |
| Comparable small fixing job (picture or shelf hanging), Sydney | $80 | $125 | $205 |
| Half-day handyman, Sydney (4 hours) | $230 | $415 | $645 |
| Handyman hourly rate, Melbourne | $52 | $94 | $125 |
- Curtains and rods are usually extra unless you supply them, so ask whether the quote includes brackets, fixings and old-curtain removal.
- Book every window in one visit so the minimum charge is paid once, not for each curtain.
- Compare the options in our types of blinds guide and outdoor blinds guide if you’re unsure curtains are the right choice.
FAQ: curtain installation
How much does curtain installation cost in Sydney?
A Sydney handyman typically charges about $105 an hour, with a range of $57 to $140 (October 2026), and a minimum charge around $140. The final price depends on the number of windows, height, wall type and whether the curtains and rods are supplied.
How high should you hang curtains?
Hang the rod higher and wider than the window so the curtains clear the glass when open. The hem should clear the floor slightly. Measure from the floor, mark the bracket positions with a level, and check them before drilling.
Is sheer curtain installation different?
Sheers usually hang on a second rod or track behind the main curtains. Check the clearance between the two, fix into studs or masonry where you can, and hang both to the same height so the hems line up.
Can you install curtains in a rental?
Yes, but ask your landlord in writing first. NSW lets tenants request internal curtains and removable blinds, and a landlord cannot unreasonably refuse, but the tenant pays unless agreed. Heritage properties and strata have extra limits.
Getting curtain installation done in Sydney
If you’d rather skip the ladder and the drilling, we can fit your rods and tracks level and secure, hang the curtains and patch old holes in one visit. Book curtain installation in Sydney and add other small jobs to the same booking. For roller blinds, see our roller blind guide and vertical blind slats guide.


