How Much to Tile a Bathroom?

How much to tile a bathroom in Sydney typically runs from about $2,800 to $7,000 for a standard bathroom, labour and tiles included (indicative — get itemised quotes). Labour is roughly two-thirds of that, and the price moves with floor area, tile size, wall height and how much prep the old surface needs.

This guide breaks down tiler cost per m2, per hour and per day, compares major cities, and shows what a fair quote should include. We also cover when a handyman is the right person and when you need a licensed trade.

Key points

  • A standard bathroom retile commonly lands between $2,800 and $7,000 all up (indicative — get itemised quotes), with labour the largest share.
  • The biggest cost drivers are prep work, large-format or mosaic tiles, and any waterproofing needed under the new tiles.
  • The cheapest honest saving is supplying your own tiles and removing nothing yourself until you have checked for asbestos in pre-1990 linings.
  • DIY suits a small splashback or a floor patch, but wet-area waterproofing needs a licensed trade, and a handyman typically charges $105 an hour (range $57–$140, October 2026).

How much to tile a bathroom: price table

These ranges cover supply and installation of standard ceramic or porcelain tiles in Sydney. They are an indicative guide only, so get itemised quotes before you commit.

JobMaterialsLabourTotal
Small ensuite, floor only$300–$900 (indicative)$600–$1,400 (indicative)$900–$2,300 (indicative)
Standard bathroom, floor and wall tiles$800–$2,500 (indicative)$2,000–$4,500 (indicative)$2,800–$7,000 (indicative)
Larger bathroom, full-height walls and niche$1,500–$4,500 (indicative)$3,500–$7,000 (indicative)$5,000–$11,500 (indicative)
  • Waterproofing is a separate licensed trade, so confirm whether the quote includes it or lists it as an extra.
  • Strip-out and rubbish removal are often priced separately, and old tile removal can take longer than laying the new ones.
  • Premium stone, feature walls and heated floors lift the total well above these bands, and the heating needs a licensed electrician.
  • Prices vary by suburb and by season, so treat every figure here as a starting point for your own quotes.

Tiler cost per m2, per hour and per day

Tilers usually quote a rate per square metre, which makes it easier to compare quotes than an hourly figure. Day rates suit smaller or awkward jobs.

Pricing methodTypical rangeNotes
Tiler labour per m2, standard floor tiles$45–$90 (indicative — get itemised quotes)Straight lay, flat substrate, medium-sized tiles.
Tiler labour per m2, walls, mosaics or large format$60–$120 (indicative — get itemised quotes)More cutting, more levelling and slower work.
Tiler cost per hour$60–$110 (indicative — get itemised quotes)Used for repairs and small patches.
Tiler cost per day$450–$850 (indicative — get itemised quotes)Check whether the price includes adhesive and grout.
Handyman, Sydney (small tiling repairs)$57–$140 an hour, typical $105Includes GST; October 2026 data.
Handyman call-out or minimum charge, Sydney$92–$170, typical $140Charged even for a five-minute fix.
Handyman full day, Sydney (8 hours)$435–$1,025, typical $690Can cost less than eight hourly-billed hours.
  • Ask each tiler whether the per-square-metre rate covers adhesive, grout, cutting and cleaning up, as some quote labour only.
  • Expect a minimum charge on small jobs, because a tiler still has to travel, set up and return to grout the next day.
  • Compare quotes using the same tile size and layout, or the cheapest total may simply be the smallest scope.

Tiler cost by city

Sydney usually sits at the top of the range because of access, parking and demand. The handyman rates below are verified; the tiler rates are indicative.

CityHandyman hourly rateTiler labour per m2
Sydney$57–$140, typical $105$55–$110 (indicative — get itemised quotes)
Melbourne$52–$125, typical $94$50–$105 (indicative — get itemised quotes)
BrisbaneGet quotes$50–$105 (indicative — get itemised quotes)
PerthGet quotes$50–$105 (indicative — get itemised quotes)
AdelaideGet quotes$50–$105 (indicative — get itemised quotes)

What affects how much to tile a bathroom

  • Floor area and wall height, since a full-height wall in a larger room can double the tiled area compared with a half-height wall.
  • Tile size and type, because large-format porcelain and mosaics take longer to level, cut and grout than standard tiles.
  • Substrate condition, as uneven or cracked slabs need levelling first, and a pre-1990 bathroom needs an asbestos check before demolition.
  • Old tile removal, which can take hours in a Sydney terrace with thick bedding and hard adhesive under the surface.
  • Waterproofing, which must be done by a qualified licensed trade before tiling and priced separately from the tiler.
  • Access, such as upper-floor units with no lift or lack of parking, which adds time on every trip with heavy boxes.
  • Patterns like herringbone or stack bond, which waste more tile and slow the tiler compared with a straight lay.

DIY vs hiring a tiler

JobDIYHire a tiler or trade
Cracked tile or small patchOften fine; see our cracked tile repair guideBook if tiles are discontinued or the base is damp
Splashback or small wall areaReasonable if you can mark out and cut cleanlyBook if the wall is uneven or rendered
Full bathroom floor and wallsNot recommended without experienceHire a tiler, plus a licensed waterproofer
Waterproofing wet areasNoBook a licensed waterproofer or plumber
Asbestos-suspect liningsNoStop, check asbestos.nsw.gov.au and use a licensed assessor
  • If you do want to learn the basics first, read our how to tile guide before you buy any materials.
  • Test a few tiles dry on the floor first, because layout mistakes are cheap to fix before adhesive goes down.

How to save on bathroom tiling without cutting corners

  1. Choose standard-sized tiles in a plain layout, because patterns and mosaics add labour more than the tile price itself.
  2. Supply the tiles yourself if the tiler agrees, and order extra for cuts and breakages, but keep the receipt for batch numbers.
  3. Ask for a per-square-metre rate in writing, so extras such as levelling and strip-out are listed separately.
  4. Book the handyman for the small jobs, like replacing skirting boards or a toilet seat, instead of paying the tiler’s hourly rate.
  5. Combine work in one visit with the waterproofer, so the tiler starts as soon as the membrane has cured.
  6. Get at least three itemised quotes and compare line by line, not just by total.

What a fair tiler quote should include

  • An itemised split of tiles, adhesive, grout, labour and any levelling compound, so you can compare quotes properly.
  • Strip-out and waste removal, including who takes old tiles away and where they go.
  • Waterproofing details, showing who does it, what product they use and whether it follows the manufacturer’s instructions.
  • The tradesperson’s licence number, because in NSW residential building work valued at more than $5,000 must be done by someone licensed by Building Commission NSW.
  • A written contract: work under $20,000 uses a small jobs contract, and the maximum deposit before work starts is 10%.
  • The start date, expected finish and what happens if hidden damage turns up behind old tiles.
  • A written workmanship warranty, which should be stated clearly and not left as a verbal promise.

FAQ: what a tiler costs

How much to tile a bathroom?

A standard Sydney bathroom with floor and wall tiles commonly runs about $2,800 to $7,000 including labour and tiles (indicative — get itemised quotes). Waterproofing, strip-out and premium tiles are extra, and larger bathrooms can go well beyond that range.

How much does a tiler charge per square metre?

Labour for standard tiles is often around $45 to $90 per square metre in Sydney, rising for walls, mosaics and large-format tiles (indicative — get itemised quotes). Ask whether adhesive, grout and levelling are included in that rate.

How much do tilers charge per square meter?

The answer is the same however you spell it: expect labour-only rates around $45 to $120 per square metre depending on tile size and complexity (indicative — get itemised quotes). Always compare quotes on a labour-only basis before you add the materials.

How much is a tiler per hour?

Tilers often work out at about $60 to $110 an hour (indicative — get itemised quotes), though most price by the square metre. A general handyman in Sydney typically charges $105 an hour (range $57–$140, October 2026) for small repairs.

How much does a tiler cost per hour for a repair?

For a cracked tile or small patch, you may pay a handyman’s call-out or minimum charge, typically $140 (range $92–$170), plus the tile and grout. Larger repairs are better priced per job than per hour, so ask for a fixed quote.

How much does a tiler cost per day?

Day rates for tilers commonly sit around $450 to $850 (indicative — get itemised quotes). A handyman’s full day in Sydney typically costs $690 (range $435–$1,025), so use one for small tasks and a tiler for larger tiling.

Getting your bathroom tiled in Sydney

If you only need a repair, regrout or a few fixes around a tiling job, we can book a handyman who brings the right bits, adhesive and grout. For full retiles, we help you get itemised quotes from qualified trades and suggest a licensed waterproofer first. Book a handyman in Sydney and bundle small jobs, such as replacing a toilet seat or tightening a loose one, on the same visit.