Vertical blinds replacement is usually a matter of unclipping the damaged slats, measuring the length and width, ordering matching replacement slats and hooking them back onto the carriers. The thing that goes wrong most often is a mismatched slat width or carrier type, so measure and photograph the old part before you order.
This guide covers vertical blinds replacement step by step, replacement parts such as chains and carriers, DIY ziptrak and S-fold curtain tracks, what shutters and blinds cost, and when to book a handyman. For the fixings that hold tracks and rods, see our curtain rod installation guide.
Key points
- Replacing slats is a job of about eight steps with a tape measure and a camera, and it is far cheaper than a whole new blind.
- The one thing you can’t skip is matching the slat width and the carrier hook, because parts from different brands rarely fit each other.
- Keep cords and chains out of children’s reach, and fit the safety devices supplied with the blind.
- A Sydney handyman charges about $140 as a typical call-out and around $105 an hour (October 2026), and fitting a few slats usually takes one short visit.
Vertical blinds replacement: can you do it yourself?
Most people can replace a few slats or a chain with a stepladder and 30 minutes, but a few situations call for care.
| Your situation | DIY OK? | Why |
|---|---|---|
| A few damaged slats on a sliding door | Yes | Slats unhook from the carriers, so no tools are needed beyond a ladder. |
| Broken chain or cord | Yes | The chain clips into a control unit, and a replacement chain usually matches the original. |
| Track or carriers snapped | Sometimes | Often easier to replace the whole headrail, so check what the maker sells. |
| Wide patio door or high window | With a helper | A long headrail is heavy and awkward above shoulder height. |
| Drilling into the wall or ceiling for a new track | With a detector | Scan for cables and pipes, and find a stud or timber behind plasterboard. |
| Rental property | Ask first | NSW tenants can request removable blinds, but you need consent first, and the landlord can’t unreasonably refuse. |
| Motorised or powered blinds, track lighting | No | Any new wiring or power point needs a licensed electrician. |
Tools and materials for vertical blinds replacement
| Item | What it’s for | Tip |
|---|---|---|
| Tape measure | Slat width, length and drop | Measure an undamaged slat, not the damaged one, and write the figures down. |
| Phone camera | Records the carrier and chain type | Photograph the carrier hook, the clip and any brand markings before you remove anything. |
| Stepladder | Reaches the headrail | A stable ladder with a second person nearby is safer than a chair. |
| Replacement slats or blades | Replaces the damaged panels | Order extras in the same batch, because fabric colour can vary between production runs. |
| Replacement chain, cord or carriers | Restores operation | Match the chain type and the carrier shape to the existing parts. |
| Drill and level | Only if fitting a new track or bracket | Use a spirit level and anchors suited to the wall; check the packet rating. |
Vertical blinds replacement: step by step
Allow time for ordering, because replacement slats are usually cut or supplied to size.
- Close the blind fully, take photos of the carriers and headrail, and note any brand name or code stamped on the track.
- Measure the width of a good slat, its length from top to bottom, and the spacing between carriers.
- Check whether the damage is to the slat, the carrier hook or the chain, so you order the right part.
- Order replacement slats from the maker or a blind supplier, with matching colour, width and length.
- Rotate the carriers open, slide the damaged slat off its hook, and keep the weights or bottom clips.
- Hang the new slat on the carrier hook, then reattach any bottom weight or chain so all slats sit level.
- Test the tilt and draw movement, and adjust the chain tension so the slats rotate smoothly together.
- Fit the cord or chain safety device supplied, keep chains away from cots and beds, and recheck the blind closes fully.
Replacement parts for vertical blinds and other blinds
Parts matter more than slats on older blinds, because a worn carrier jams the whole row. Our types of blinds guide shows how the main blinds differ.
- Order vertical blind replacement blades by the width and length printed on the old slat, and check the hook shape before you buy.
- Replace a blind chain or cord with the same type, and fit the safety device supplied so it stays out of reach of children.
- Buy vertical blinds replacement parts, such as carriers and stem hooks, from the maker or a blind supplier, as universal parts rarely fit.
- Replace venetian blind slats with the same slat width and colour, and check the ladder cord at the same time.
- Consider a whole new blind if the track is warped or the fabric has faded, because mismatched slats show up against old ones.
- For roller blinds, our roller blind installation guide covers a fresh install in about the same number of steps.
S-fold curtains, ziptrak and other blind systems
Readers searching for vertical blinds replacement often compare them with curtains and outdoor blinds, so here are the practical points.
- Install an S-fold curtain track by locating studs or timber, fixing the track brackets level, then clipping the S-fold curtain runners and curtain onto the rail.
- Fit S-fold curtains with the heading tape hooked into each runner so the folds fall evenly, and measure the track length before ordering the fabric.
- Choose DIY ziptrak blinds only for small outdoor openings, and book a professional for large patio spans, as outdoor tracks must be accurate and square.
- Fix a clothes hanging rod or wardrobe rod into studs with brackets rated by the maker, and check the packet rather than guessing.
- See our outdoor blinds guide for patio options and our curtain installation cost guide for curtain labour prices.
- Book a licensed electrician for hanging track lighting, air curtains or motorised tracks, because wiring is licensed work in NSW.
Window shutter, vertical blind and honeycomb prices
Prices below are rough guides from supplier ranges, not verified quotes, so ask for itemised pricing before you commit. Our blinds cost guide and roller shutters price guide compare more options.
| Item | Typical range | What affects it |
|---|---|---|
| Replacement vertical blind slats | Often well below a new blind (indicative — get itemised quotes) | Number of slats, fabric, brand |
| How much are vertical blinds (new, standard window) | About $60 to $250 (indicative — get itemised quotes) | Size, fabric and whether ready-made or made to measure |
| Luxaflex honeycomb blinds price | About $150 to $500 per window (indicative — get itemised quotes) | Size, cell type and light filtering |
| Window shutter cost (cost of window shutters) | About $400 to $1,000 per window (indicative — get itemised quotes) | Material, size and whether custom-made |
| Air curtain price | Wide range (indicative — get itemised quotes); fitting needs a licensed electrician | Width, power and brand |
Common mistakes with vertical blinds replacement
- Ordering slats without checking the width, length and hook type, so the new parts don’t fit the carriers.
- Replacing one slat in a faded blind, which leaves a visible colour mismatch at the window.
- Skipping the cable and pipe scan when drilling for a new track or bracket.
- Overtightening screws into plasterboard until the lining crushes or the hole strips.
- Ignoring asbestos in homes built or renovated before 1990 before drilling old sheeting or eaves.
- Working above shoulder height without a second person holding the ladder or the headrail.
When to call a handyman for vertical blinds replacement (or a licensed trade)
- The track or headrail is bent or broken and must be unscrewed and refitted safely.
- You can’t match the slats and would rather have a new blind measured and fitted in one visit.
- The window is high, wide or over a staircase, where a ladder and helper make the job safer.
- You want motorised blinds, track lighting or an air curtain, which need a licensed electrician such as TQN Electrician.
- The home was built or renovated before 1990 and the sheeting or eaves around the window could contain asbestos.
- You’re renting and want the work done cleanly, with the landlord’s written consent in place.
Cost to hire a handyman for vertical blinds replacement in Sydney
Prices include GST and come from October 2026 Sydney data. The minimum charge applies even to a short fix.
| Job | Low | Typical | High |
|---|---|---|---|
| Handyman hourly rate, Sydney | $57 | $105 | $140 |
| Call-out or minimum charge, Sydney | $92 | $140 | $170 |
| Small fixing job, such as hanging a picture or shelf (per visit) | $80 | $125 | $205 |
| Half-day handyman, Sydney (4 hours) | $230 | $415 | $645 |
| Full-day handyman, Sydney (8 hours) | $435 | $690 | $1,025 |
- Replacing a few slats usually sits close to the call-out charge if you supply the parts (indicative — get itemised quotes).
- Bundle several blinds and a curtain track into one visit, because a full day can cost less than eight hourly-billed hours.
FAQ: vertical blinds replacement
How much do window shutters cost?
Window shutters usually cost about $400 to $1,000 per window, depending on material, size and whether they are custom-made (indicative — get itemised quotes). Plantation shutters sit at the higher end, while basic aluminium or ready-made options are cheaper. Always compare itemised quotes.
How to install an S-fold curtain track?
Find a stud, joist or solid fixing point, then mark the bracket positions level along the wall or ceiling. Fix the brackets with fixings suited to the surface, clip the track in, and test the glide. Check the maker’s instructions for bracket spacing and load.
How to install S-fold curtains?
Slide the runners onto the track, then hook the curtain’s heading tape into each runner so the S-shaped folds fall evenly. Draw the curtain across, adjust the end runners, and check it clears the floor and any furniture before you finish.
How much are vertical blinds?
A ready-made vertical blind for a standard window costs about $60 to $250, while made-to-measure sliding-door blinds cost more (indicative — get itemised quotes). Replacing only the slats is usually cheaper than buying a whole new blind.
Getting vertical blinds replaced in Sydney
If you would rather not chase parts, we can measure, supply and fit new slats or a complete blind in one visit, and rehang curtain tracks at the same time. Book blind and curtain installation in Sydney and add any other small jobs to the same visit.


