Bathroom Remodel Cost in Sydney (2026 Guide)

A standard bathroom renovation in Australia typically costs $15,000–$30,000 for a like-for-like layout, and more once pipes move or fixtures get fancy (indicative — get itemised quotes). Your bathroom remodel cost is driven mainly by size, waterproofing, tiling and whether the plumbing stays where it is. This guide gives indicative price bands, a city comparison, ways to save, and a quote checklist. It also covers the smaller jobs a handyman can handle, with a kitchen renovation cost guide for the other big wet room.

Key points

  • Expect roughly $15,000–$30,000 for a standard full bathroom remodel cost in Sydney, with cosmetic refreshes far lower and layout changes far higher (indicative — get itemised quotes).
  • The biggest cost driver is moving plumbing and redoing waterproofing, because both need licensed trades and floor or wall rebuilds.
  • The cheapest option is a cosmetic refresh: regrout, reseal, new accessories and a swapped vanity, keeping every pipe where it is.
  • DIY is fine for accessories, silicone and flat-pack assembly; anything involving water, wiring or wet-area linings needs a licence.

Bathroom remodel cost: price table

These bands cover the common jobs, including the cost of retiling a bathroom and the cost of a new bathroom from scratch.

Job typeMaterialsLabourTotal
Cosmetic refresh (regrout, reseal, accessories, vanity swap)$500–$2,500 (indicative)$1,000–$5,000 (indicative)$1,500–$7,500 (indicative)
Retiling floor and walls (cost of retiling bathroom)$1,000–$3,500 (indicative)$2,500–$6,000 (indicative)$3,500–$9,500 (indicative)
Standard full renovation, same layout$6,000–$13,000 (indicative)$9,000–$17,000 (indicative)$15,000–$30,000 (indicative)
Ensuite bathroom renovation cost, compact room$5,000–$11,000 (indicative)$7,000–$14,000 (indicative)$12,000–$25,000 (indicative)
Layout change with new plumbing and waterproofing$10,000–$20,000 (indicative)$14,000–$25,000 (indicative)$24,000–$45,000 (indicative)
Premium renovation with custom joinery$18,000–$35,000 (indicative)$15,000–$30,000 (indicative)$33,000–$65,000 (indicative)
  • These are planning bands, not quotes: tile choice, access and the age of the house can move any row well outside its range.
  • The average bathroom reno cost sits in the standard row, because most homeowners keep the toilet, shower and vanity positions.
  • A job above $5,000 must be done by someone licensed by Building Commission NSW, so check the builder’s licence before signing.

Bathroom remodel cost by city

Only Sydney and Melbourne handyman rates are verified here, so treat the other rows as a prompt to collect local quotes.

CityHandyman hourly rateCall-out or minimumBathroom renovation guidance
Sydney$57–$140 (typical $105)$92–$170 (typical $140)Use the price table above; strata approvals, stairs and older wet areas push totals up.
Melbourne$52–$125 (typical $94)$84–$160 (typical $125)Handyman rates run a little lower; ask for itemised quotes rather than assuming the same saving applies to the full job.
Brisbane and Gold CoastNo verified rate heldNo verified rate heldFor bathroom renovation cost on the Gold Coast, get three itemised local quotes from builders licensed in Queensland.
PerthNo verified rate heldNo verified rate heldGet three itemised local quotes and compare scope line by line.
AdelaideNo verified rate heldNo verified rate heldGet three itemised local quotes and compare scope line by line.

What affects your bathroom remodel cost

Six factors decide whether your quote lands at the bottom or the top of a band.

  • Room size and access: a compact ensuite needs fewer tiles and a smaller vanity, but a third-floor unit with no lift adds labour to carry materials and waste.
  • Moving plumbing: relocating the toilet, shower or floor waste needs a licensed plumber and floor work, which can add thousands (indicative — get itemised quotes).
  • Waterproofing: the membrane under the tiles must be done properly by a licensed trade, and skipping it is the most expensive saving you can make.
  • Tiles and layout: large-format porcelain, mosaics and patterned layouts take longer to set out and cut, so labour rises even when the tile is cheap.
  • Fixtures and electrical: freestanding baths, frameless screens, heated rails and new exhaust fans widen the price, and power work needs a licensed electrician.
  • Older homes: homes built or renovated before 1990 are likely to contain asbestos in wet-area linings and floor coverings, so identify suspect material before anyone disturbs it.

DIY vs hiring a pro for a bathroom renovation

Sort jobs by what they touch: water, wiring and old linings are never DIY, while finishing touches usually are.

DIY or a handymanBook a licensed trade
Cut out and replace tired silicone, and regrout small areasWaterproofing under tiles: book a licensed plumber or waterproofer
Fit towel rails, hooks and a mirror after scanning for cables and pipesMoving or adding taps, toilets and drains: book a licensed plumber
Assemble a flat-pack vanity or storage cabinetPower points, exhaust fans, heated rails and lights: book a licensed electrician
Swap a toilet seat using our toilet seat replacement guideRemoving wall or floor linings in a pre-1990 home: treat as asbestos until tested
Hang a shelf into studs or masonry with fixings matched to the wallBuilding work valued over $5,000: licensed by Building Commission NSW
Replace a torn window flyscreen, as in our flyscreen repair guideWall removal or structural changes: a licensed builder with a written contract

How to save on bathroom renovation cost without cutting corners

  1. Keep the toilet, shower and basin where they are, because moving drains is the single largest avoidable cost in most bathrooms.
  2. Collect at least three itemised quotes from licensed trades and compare scope line by line, not just the bottom number.
  3. Choose standard-size tiles and a simple layout, then spend the saving on waterproofing and a good-quality shower mixer.
  4. Regrout and reseal first if the tiles are sound; our epoxy grout guide explains when a tougher grout is worth the extra money.
  5. Bundle small jobs into one handyman visit: a Sydney half-day (4 hours) costs $230–$645 (typical $415), and the call-out charge is $92–$170 (typical $140).
  6. Pay no more than the 10% maximum deposit before work starts, and insist on a written contract: a small jobs contract under $20,000, a full contract plus Home Building Compensation cover over $20,000.

What a fair bathroom renovation quote should include

  • Itemised materials with brand, model and tile quantity, so you can check each line against supplier pricing.
  • The waterproofing scope, who carries it out and what paperwork or warranty you receive for that work.
  • Access costs, including stairs, hoisting, protection of hallway floors and carpet; see our carpet replacement cost guide if a worn hallway needs replacing afterwards.
  • Demolition, waste removal and skip or bin charges, with a line for the asbestos check if the house is older.
  • Licence numbers for the builder, plumber and electrician, which you can verify with Building Commission NSW before work starts.
  • A payment schedule tied to stages, a start and finish window, and the workmanship warranty in writing rather than a verbal promise.

FAQ: bathroom renovation cost

How much does a bathroom renovation cost in Sydney?

A standard Sydney bathroom renovation commonly lands around $15,000–$30,000 (indicative — get itemised quotes). Strata rules, stairs, older wet areas and layout changes push it higher. A cosmetic refresh that keeps every pipe in place costs far less, so decide your scope before you ask for quotes.

How much to renovate a bathroom in Australia?

Nationally, plan on roughly $1,500–$7,500 for a cosmetic refresh, $15,000–$30,000 for a standard renovation and $24,000 or more when the layout changes (indicative — get itemised quotes). Local labour rates differ, so collect three itemised quotes from licensed trades in your own suburb.

How much is a new bathroom?

A new bathroom installation, including demolition, plumbing, waterproofing, tiling and fixtures, usually falls in the standard or layout-change rows of the table (indicative — get itemised quotes). The fixtures you choose and the room size move the figure most, so request fixture allowances in writing.

How much does it cost to renovate a bathroom yourself?

You save only on labour you are licensed and able to do, mostly finishing work. Plumbing, waterproofing and electrical work legally needs a licensed trade in NSW regardless of cost, and mistakes behind tiles are expensive to find. Price the job both ways before you commit to DIY.

How much are bathroom renovations that include an ensuite?

A compact ensuite often runs $12,000–$25,000 for a full renovation (indicative — get itemised quotes), because the room is small but still needs full waterproofing and plumbing. Confirm whether the quote covers extraction, lighting and any wall removal.

Getting your bathroom renovation costed in Sydney

If you want one site visit to sort the finishing jobs and flag what needs a licence, we can help. Book a Sydney handyman for regrouting, resealing, fittings and flat-pack assembly, and we will tell you when to book a licensed plumber or electrician for the wet and wired work. For more on how a similar budget breaks down, see our TV wall mounting guide for fixing into tiled or lined walls, and curtain rod installation for the bathroom window.